Yamaha MOXF6 Reference Manual - Page 57
Arpeggio Edit, Tempo Arpeggio Tempo, Switch Common Switch, SyncQtzValue Sync Quantize Value
View all Yamaha MOXF6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE [F5] ARP ED (Arpeggio Edit) Pressing this button calls up the Arpeggio Edit display of the Performance mode. [F6] EFFECT Pressing this button calls up the EFFECT display (page 63) of Performance Common Edit. Arpeggio Edit This display contains the basic settings for Arpeggio playback, including Type and Tempo in the Performance mode. The MOXF6/MOXF8 has four arpeggiators. In the Performance mode, the different Arpeggio types can be assigned to up to four parts, and the up to four arpeggio types can be simultaneously played. The parameters are the same as in the Voice mode (page 27), except for the following parameters. Operation [PERFORM] Performance selection [F5] ARP ED Performance mode ARP [EDIT] [F1] COMMON Tempo (Arpeggio Tempo) Knob Determines the tempo for the Arpeggio. Settings: 5 - 300 NOTE If you are using this instrument with an external sequencer, DAW software, or MIDI device, and you want to synchronize it with that device, set the "MIDI Sync" parameter in the MIDI display of the Utility mode (page 148) to "external" or "auto." When "MIDI Sync" is set to "auto" (only when MIDI clock is transmitted continuously) or "external," the Tempo parameter here indicates "external" and cannot be changed. NOTE This parameter can be set also by holding the [SHIFT] button and pressing the [ENTER] button several times repeatedly at the desired tempo. This function is referred to as "Tap Tempo." Switch (Common Switch) Determines whether Arpeggio is on or off for all Parts. This setting is applied to the ARP [ON/OFF] button on the panel. Settings: off, on SyncQtzValue (Sync Quantize Value) Determines the actual timing at which the next Arpeggio playback starts when you trigger it while the Arpeggio of a certain Part is played back. When set to "off," the next Arpeggio starts as soon as you trigger it. The number shown at right of each value indicates the resolution of the 1/4 note in clocks. Settings: off, 2 60 (32nd note), 63 80 (16th note triplet), 6 120 (16th note), 83 160 (8th note triplet), 8 240 (8th note), 43 320 (1/4 note triplet), 4 480 (1/4 note) QtzStrength (Quantize Strength) Determines the offset value for "QtzStrength" in the [F5] PLAY FX display. This parameter is applied to all parts. Settings: -100 - +0 - +100 VelocityRate Determines the offset value for "VelocityRate" in the [F5] PLAY FX display. This parameter is applied to all parts. Settings: -100 - +0 - +100 GateTimeRate Knob Determines the offset value for "GateTimeRate" in the [F5] PLAY FX display. This parameter is applied to all parts. Settings: -100 - +0 - +100 Swing Determines the offset value for "Swing" in the [F5] PLAY FX display. This parameter is applied to all parts. Settings: -120 - +0 - +120 Performance Mode Performance Play [F1] PLAY [F2] VOICE [F3] PORTA [F4] EG [F5] ARP ED [F6] EFFECT Arpeggio Edit [F1] COMMON [F2] TYPE [F3] MAIN [F4] LIMIT [F5] PLAY FX [F6] OUT CH Performance Edit Common Edit [F1] GENERAL [F2] OUT/MFX [F3] MEQ [F4] USB I/O [F5] A/D IN [F6] EFFECT Part Edit [F1] VOICE [F2] OUTPUT [F3] EQ [F4] TONE [F5] RCV SW Performance Job [F1] INIT [F2] RECALL [F3] COPY [F4] BULK Performance Record [F1] SETUP [F2] REC TR [F3] OTHER [F5] CLICK [F6] INFO Supplementary Information MOXF6/MOXF8 Reference Manual 57