Yamaha MX49 Owner's Manual - Page 37

6 If you've set "Type" to "Performance" in step 5, select the desired Performance number, then press [ENTER]. If you've set "Type" to something other than "Performance" in step 5, go on to step 8. Src*Performance 2 001(A01):MXCategory 7 Select the destination Performance number (for loading), then press [ENTER]. Dst*Performance 2 003(A03):Sirius 8 Press [INC/YES]. The data is loaded from the USB flash memory. To cancel the Load operation, press [EXIT] while the "Now loading..." message is still displayed. q**Are*you*sure?***w e****[NO]/[YES]**** r 9 Press [EXIT] repeatedly if necessary to exit from the File display. Quick Guide Connecting an external MIDI instrument With a standard MIDI cable (available separately), you can connect an external MIDI instrument, and transmit MIDI data between the MX49/MX61 and the connected instrument. Either the MIDI connectors or the USB [TO HOST] terminal can be used for MIDI data transmission/ reception; however, they cannot be used at the same time. Select the desired connector for use in the "MIDI IN/ OUT" parameter of the [UTILITY]  "02:MIDI" display. As you work through the explanations in this chapter, set "MIDI IN/OUT" to "MIDI" since MIDI is used as the example connection here. Controlling the MX49/MX61 from an external MIDI keyboard or synthesizer Here, we'll use an external keyboard or synthesizer to remotely select and play the Voices of the MX49/MX61. MIDI [IN] MX49/MX61 MIDI OUT External MIDI keyboard (for example, an 88-key synthesizer) 37 MX49/MX61 Owner's Manual