Yamaha NS-8HX Owner's Manual - Page 2

ATTACHING THE SPIKES Spike x 4 Nut x 4 PLACING THE SPEAKERS I Using as 2ch stereo speakers Better stereo images will be obtained when the speakers are slightly angled in towards the listeners. When setting up the speakers on a thick carpet, use the spikes to increase stability and improve sound quality. Attach the spikes at four points on the speaker properly by following the procedure below. I Using as main speakers in a multi channel system Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. Set up the 2 1 speakers on the basis of your listening position by following the owner's manual supplied with your amplifier. Procedure: 1 Turn the nut close to the tip of the spike. 2 Screw the spikes into the hole of the stands. 3 Place the speaker in the desired location in an upright position and adjust the length of the spike to match the depth of the carpet. 4 When adjustment is finished, turn the nut up to the base of the stand firmly. Notes G The tips of the spikes may scratch or otherwise damage the flooring. Please be careful when positioning the speakers. G If force is applied to the side of the speaker, it may fall and damage the speaker or cause personal injury. Please be careful. NS-8HX NS-8HX Subwoofer Effect R Center Effect L Note These speakers feature a magnetically shielded design, but there is still a chance that placing them too close to a TV set might impair picture color. Should this happen, move the speakers away from the TV set. E-2