Yamaha NS-E120 Owner's Manual - Page 2

Setting Up The Speakers, Specifications

Page 2 highlights

Wall/ wall support SETTING UP THE SPEAKERS Ⅵ Attaching the speakers to a wall The speakers may be attached to a wall by using the hooks provided on the speakers' back panels. Fasten wood screws into a firm wall or wall support as shown in the diagram, and hang the speaker hooks on the protruding screws. ∅4-5 mm MIN. 12 mm 4 mm Tapping screw (Available at the market) WARNING: * Each speaker weighs 1.8 kg (4 lbs.). Do not attach them to thin plywoods or soft wall surface materials, as the screws may tear free from flimsy surfaces, causing the speakers to fall and be damaged, or result in personal injury. * Do not fasten the speakers to walls with nails, adhesives, or other unsound hardware. Long-term use and vibrations may cause them to pull free. * To avoid accidents resulting from tripping over loose speaker cables, fix these to the wall along with the speakers. NOTE: The speakers can be hung on a wall in one of two different configurations: vertically or horizontally. The speaker hooks have been arranged so that the speakers may be mounted in either of the two configurations shown by the following figures. Upright configuration 100mm Side long configuration 80mm Ⅵ Setting the speakers on a shelf or rack As shown in the figure, the speakers may be stood in an upright or side-long configuration on either shelves or racks, by attaching one of the supplied stands to the back of each speaker. Ex.) When setting the speaker upright SPECIFICATIONS Type 2-Way Bass-Reflex type Speaker Unit ........12 cm paper cone woofer (JA1280) 2.5 cm semi-dome tweeter (JA05R8) Crossover 6 kHz (6 dB/oct) Input Terminal Push-type Nominal Impedance 6 ohms Frequency Response 70 Hz - 20 kHz Nominal Input Power 50W Music Input Power 100W Sensitivity 91 dB/W⅐m Dimensions (WxHxD 220 mm x 297 mm x 89 mm (8-5/8"x11-11/16"x3-1/2") Weight 1.8 kg (4 lbs.) Accessories 2 speaker cables (10m each), 2 stands * Specifications subject to change without notice due to product improvements. VP15950-0 BWWR,W Printed in Japan

  • 1
  • 2

SETTING UP THE SPEAKERS
m
Attaching the speakers to a wall
The speakers may be attached to a wall by using
the hooks provided on the speakers’ back panels.
Fasten wood screws into a firm wall or wall support
as shown in the diagram, and hang the speaker
hooks on the protruding screws.
WARNING:
* Each speaker weighs 1.8 kg (4 lbs.). Do not attach
them to thin plywoods or soft wall surface materials,
as the screws may tear free from flimsy surfaces,
causing the speakers to fall and be damaged, or
result in personal injury.
* Do not fasten the speakers to walls with nails,
adhesives, or other unsound hardware. Long-term
use and vibrations may cause them to pull free.
* To avoid accidents resulting from tripping over loose
speaker cables, fix these to the wall along with the
speakers.
NOTE:
The speakers can be hung on a wall in one of two
different configurations: vertically or horizontally.
The speaker hooks have been arranged so that the
speakers may be mounted in either of the two
configurations shown by the following figures.
Upright configuration
Side long configuration
m
Setting the speakers on a shelf or rack
As shown in the figure, the speakers may be stood
in an upright or side-long configuration on either
shelves or racks, by attaching one of the supplied
stands to the back of each speaker.
SPECIFICATIONS
Type
......................................
2-Way Bass-Reflex type
Speaker Unit
........
12 cm paper cone woofer (JA1280)
2.5 cm semi-dome tweeter (JA05R8)
Crossover
..........................................
6 kHz (6 dB/oct)
Input Terminal
.............................................
Push-type
Nominal Impedance
.........................................
6 ohms
Frequency Response
..........................
70 Hz – 20 kHz
Nominal Input Power
............................................
50W
Music Input Power
..............................................
100W
Sensitivity
...................................................
91 dB/W
z
m
Dimensions (WxHxD)
.........................................
220 mm x 297 mm x 89 mm
(8-
5
/
8
”x11-
11
/
16
”x3-
1
/
2
”)
Weight
....................................................
1.8 kg (4 lbs.)
Accessories
..................
2 speaker cables (10m each),
2 stands
* Specifications subject to change without notice due
to product improvements.
VP15950-0 BWWR,W
Printed in Japan
Tapping
screw
(Available at the
market)
Wall/
wall support
4–5 mm
MIN.
12 mm
4 mm
100mm
80mm
Ex.)
When setting
the speaker
upright