Yamaha NS-E8800 Owner's Manual - Page 2

Ⅵ Mounting the effect speakers on the wall The speakers can be mounted on a wall by using the bracket attached to the speakers' back panels. Fasten screws into a firm wall or wall support as shown in the figure below, and hang the holes on the protruding screws. Holes Pads Make sure that the screws are caught by a narrow part of the holes securely. Put the screws into a wall according to the figure shown below. 40 mm Diam. 3.5 to 4 mm Min. 12 mm 3 mm Wall or wall support Tapping screw (available at a hardware store) WARNING ● Each speaker weights 2.3 kg. Do not mount them on thin plywood or soft wall surface material, as the screws may come out of the flimsy surface, causing the speakers to fall down and be damaged, or result in personal injury. ● Do not fasten the speakers to wall with nails, adhesives, or other unsound hardware. Long term use and vibrations may cause them to fall down. ● To avoid accidents resulting from tripping over loose speaker cords, fix them to the wall. You can also use the screw holes on the bottom of the NS-E8800 for installing the speakers on commericially available speaker stands (if you do not use the provided mounting brackets.) * Before installing, please refer to the instruction manual of the speaker stand. E-2