Yamaha NS-IC400 Owner's Manual - Page 11

English CONNECTING YOUR AMPLIFIER/RECEIVER After connecting • Lower the power amplifier/receiver volume control before changing input sources. Never change input sources (for example, FM to CD) at high listening levels. R A Always turn the receiver/amplifier unit off when installing or removing any cables. • Anytime you note distortion, reduce the volume control on your power amplifier/ receiver to a lower setting. Never allow your power amplifier to be driven into "clipping". PAINTING THE SPEAKER GRILLE The speaker grilles can be painted to match your room décor. Use high quality spray paint and select a well ventilated area before proceeding. 1 Carefully remove the grille from the speaker if attached. 2 Remove the scrim cloth that is attached to the back of the grille. (The adhesive that holds the cloth in place is reusable.) 3 Apply the paint to the grille. • Make sure that the grille holes remain free of paint. • Clogging the holes with paint may diminish the sound quality. 4 When the paint has fully dried, re- attach the scrim cloth to the back of the grille. 5 Re-install the grille on the speaker. SPECIFICATIONS Type Driver Full range Frequency response Impedance Nominal Input Maximum input Sensitivity Dimensions (with grille) Weight (with grille) NS-IC400 Full range open back type 10 cm (4") cone type 95 Hz to 40 kHz (-10dB) 8 ohms 30 W 90 W 85 dB / 2.83 V, 1 m φ150 × 86.5D mm (φ5-7/8" × 3-3/8"D) 0.8 kg (1.76 lbs) * Specifications subject to change without notice due to product improvements. * Speaker cables are not included with this model. 10 En