Yamaha NS-IW760 Owners Manual - Page 4

INSTALLATION Before installation, check to ensure that the area you are installing the speaker is free of any wall studs, by tapping the wall or using a stud finder. If you wish to paint the speaker frame and grill, please refer to page 7 "PAINTING THE SPEAKER FRAME AND GRILL" before proceeding. 1 Position the cutout template where you are installing the speaker. Make sure the template is level, then trace around the template with a pencil. TEMPLATE 4 Cut the wall along the outline you traced. 2 Drill a pilot hole in the center outline you traced. 5 Run high quality speaker cable from your receiver to the speaker. Leave a few extra feet of cable. 3 Insert the bent coat hanger wire into the hole. Then slowly rotate to check for any obstruction. If there is any 360o obstruction, patch the hole and select another location. Note: You can insulate the cavity by placing a sheet of fiberglass insulation around the speaker components to improve speaker performance. 4