Yamaha NS-IW960 Owners Manual - Page 4

INSTALLATION Before installation, check to ensure that the area you are installing the speaker is free of any wall studs, by tapping the wall or using a stud finder. If you wish to paint the speaker frame and grill, please refer to page 7 "PAINTING THE SPEAKER FRAME AND GRILL" before proceeding. 1 Position the cutout template where you are installing the speaker. Make sure the template is level, then trace around the template with a pencil. TEMPLATE 4 Cut the wall along the outline you traced. 2 Drill a pilot hole in the center outline you traced. 5 Run high quality speaker cable from your receiver to the speaker. Leave a few extra feet of cable. 3 Insert the bent coat hanger wire into the hole. Then slowly rotate to check for any obstruction. If there is any obstruction, patch the hole 360° and select another location. Note: You can insulate the cavity by placing a sheet of fiberglass insulation around the speaker components to improve speaker performance. 4