Yamaha NS-M325BL Owners Manual - Page 4

REMOVING THE FRONT COVER The front cover is attached to protect the speaker unit, but you can remove it if necessary. The front cover is fixed by magnets. Hold the speaker with one hand, and pull the front cover gently with the other to remove it. Notes: • When removing the cover, be careful that you don't touch the drive units, and don't exert excessive force with any tools. • There are magnets on the reverse side of the front cover. Do not place the front cover close to objects that might be affected by magnets, such as TVs, clocks, magnetic cards, diskettes etc. after removing it. SPECIFICATIONS Type 2-way acoustic suspension speaker system Magnetic shielding type Driver 10 cm (4") cone woofer 3 cm (1") dome tweeter Impedance 6 Ω Frequency Response 65 Hz to 50 kHz (-10d B) Nominal Input Power 30 W Maximum Input Power 120 W Sensitivity 86 dB/2.83 V/m Crossover Frequency 2.5kHz Dimensions (WxHxD 150 x 275 x 175 mm (5-7/8" x 10-13/16" x 6-7/8") Weight 3.8 kg (8 lbs.6 oz.) ● Specifications are subject to change without notice due to product improvements. ● Care should be taken not to exceed the input power values noted above. E-4