Yamaha NS-P436 Owner's Manual - Page 9
Mounting the main/rear/center speakers (and rear center speaker for NS-P436) on the wall - speaker system
View all Yamaha NS-P436 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English Ⅵ Mounting the main/rear/center speakers (and rear center speaker for NS-P436) on the wall 1 Tapping screw (Available at the hardware store) Diam. 3.5 to 4 mm You can mount the main, rear and/or center speakers (and/ or rear center speaker for NS-P436) on a wall. To mount the speakers on a wall, use the holes of the brackets attached on the speakers' back panels. Main/rear/rear center (for NS-P436) Min. 4 mm 20 mm Wall/ wall support 2 Main/rear/rear center (for NS-P436) 26 mm Center 222.8 mm Center Holes 1 Fasten two screws into a firm wall or wall support at the interval shown below. Main/rear/rear center (for NS-P436 26 mm (1") Center 222.8 mm (8-3/4") 2 Hang the speaker by mounting the holes on the protruding screws. * Make sure that the screws are securely affixed by the narrow parts of the holes. WARNING ● Each speaker weighs as follows. Main/rear/rear center (for NS-P436 1.2 kg (2 lbs. 10 oz.) Center 1.7 kg (3 lbs. 12 oz.) Do not mount them on thin plywood or a wall composed of a soft surface material. If mounted, the screws may pull out of the flimsy surface and the speakers may fall. This may damage the speakers or cause personal injury. ● Do not affix the speakers to a wall using nails, adhesives, or any other unstable hardware. Longterm use and vibrations may cause the speakers to fall. ● To avoid accidents resulting from tripping over loose speaker cables, fix the cables to the wall. ● Select an appropriate position on the wall to mount the speaker so that no one will injure his/her head or face. E-5