Yamaha P-105 Midi Reference - Page 4

MIDI Data Format / MIDI-Datenformat, Format des données MIDI / Formato de datos MIDI

Page 4 highlights

MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI 1. NOTE ON/OFF Data format: [9nH] -> [kk] -> [vv] 9nH = Note ON/OFF event (n = channel number) kk = Note number (Transmit: 09H-78H = A-2-C8 / Receive: 00H-7FH = C-2-G8) vv = Velocity (Key ON = 01H-7FH, Key OFF = 00H) Data format: [8nH] -> [kk] -> [vv] (reception only) 8nH = Note OFF event (n = channel number) kk = Note number: 00H-7FH = C-2-G8 vv = Velocity 2. CONTROL CHANGE Data format: [BnH] -> [cc] -> [vv] BnH = Control change (n = channel number) cc = Control number vv = Data Range (1) Bank Select ccH Parameter Data Range (vvH) 00H Bank Select MSB 00H:Normal 20H Bank Select LSB 00H...7FH Bank selection processing does not occur until receipt of next Program Change message. (2) Modulation (reception only) ccH Parameter Data Range (vvH) 01H Modulation 00H...7FH (3) Main Volume ccH Parameter 07H Volume MSB Data Range (vvH) 00H...7FH (4) Panpot (reception only) ccH Parameter 0AH Panpot Data Range (vvH) 00H...7FH (5) Expression ccH Parameter 0BH Expression MSB Data Range (vvH) 00H...7FH (6) Damper Pedal/Sustain ccH Parameter 40H Sustain MSB Data Range (vvH) 00H...7FH (7) Sostenuto ccH Parameter 42H Sostenuto Data Range (vvH) 00H...3FH:off, 40H...7FH:on (8) Soft Pedal ccH Parameter Data Range (vvH) 43H Soft Pedal 00H...3FH:off, 40H...7FH:on (9) Harmonic Content (reception only) ccH Parameter Data Range (vvH) 47H Harmonic Content 00H...7FH (10) Release Time (reception only) ccH Parameter Data Range (vvH) 48H Release Time 00H...7FH (11) Attack Time (reception only) ccH Parameter Data Range (vvH) 49H Attack Time 00H...7FH (12) Brightness (reception only) ccH Parameter Data Range (vvH) 4AH Brightness 00H...7FH (13) Portamento Control (reception only) ccH Parameter Data Range (vvH) 54H Portamento 00H...7FH (14) Effect1 Depth (Reverb Send Level) ccH Parameter Data Range (vvH) 5BH Effect1 Depth 00H...7FH Adjusts the reverb send level. (15) Effect3 Depth (Chorus Send Level) ccH Parameter Data Range (vvH) 5DH Effect3 Depth 00H...7FH (16) RPN 65H RPN MSB 64H RPN LSB 06H Data Entry MSB 26H Data Entry LSB 60H Data Increment 61H Data Decrement * Parameters that are controllable with RPN: • Coarse Tune • Fine Tune • Pitch Bend Range 3. MODE MESSAGES Data format: [BnH] -> [cc] -> [vv] BnH = Control event (n = channel number) cc = Control number vv = Data Range (1) All Sound Off (reception only) ccH Parameter Data Range (vvH) 78H All Sound Off 00H (2) Reset All Controllers (reception only) ccH Parameter Data Range (vvH) 79H Reset All Controllers 00H Resets controllers as follows. Controller Value Expression 127 (max) Sustain 0 (off) Sostenuto 0 (off) Soft Pedal 0 (off) (3) Local Control (reception only) ccH Parameter Data Range (vvH) 7AH Local Control 00H (off), 7FH (on) (4) All Notes Off (reception only) ccH Parameter Data Range (vvH) 7BH All Notes Off 00H Switches OFF all the notes that are currently ON on the specified channel. Any notes being held by the sustain or sostenuto pedal will continue to sound until the pedal is released. (5) Omni Off (reception only) ccH Parameter Data Range (vvH) 7CH Omni Off 00H Same processing as for All Notes Off. (6) Omni On (reception only) ccH Parameter Data Range (vvH) 7DH Omni On 00H Same processing as for All Notes Off. (7) Mono (reception only) ccH Parameter Data Range (vvH) 7EH Mono 00H Same processing as for All Sound Off. (8) Poly (reception only) ccH Parameter Data Range (vvH) 7FH Poly 00H Same processing as for All Sound Off. • When Control Change is turned OFF, Control Change messages will not be transmitted or received. • Local on/off, OMNI on/off are not transmitted. (The appropriate note off number is supplied with "All Note Off" transmission). • When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received. • Poly mode is always active. This mode will not change when the instrument receives a MONO/POLY mode message. 4 P-105 MIDI Reference / MIDI-Referenz / Référence MIDI / Referencia MIDI

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

P-105
MIDI Reference / MIDI-Referenz / Référence MIDI / Referencia MIDI
4
MIDI Data Format / MIDI-Datenformat /
Format des données MIDI / Formato de datos MIDI
1.
NOTE ON/OFF
Data format: [9nH] -> [kk] -> [vv]
9nH =
Note ON/OFF event (n = channel number)
kk =
Note number (Transmit: 09H–78H = A-2–C8 /
Receive: 00H–7FH = C-2–G8)
vv =
Velocity (Key ON = 01H–7FH, Key OFF = 00H)
Data format: [8nH] -> [kk] -> [vv] (reception only)
8nH =
Note OFF event (n = channel number)
kk =
Note number: 00H–7FH = C-2–G8
vv =
Velocity
2.
CONTROL CHANGE
Data format: [BnH] -> [cc] -> [vv]
BnH =
Control change (n = channel number)
cc =
Control number
vv =
Data Range
(1) Bank Select
ccH
Parameter
Data Range (vvH)
00H
Bank Select MSB
00H:Normal
20H
Bank Select LSB
00H...7FH
Bank selection processing does not occur until receipt of next
Program Change message.
(2) Modulation (reception only)
ccH
Parameter
Data Range (vvH)
01H
Modulation
00H...7FH
(3) Main Volume
ccH
Parameter
Data Range (vvH)
07H
Volume MSB
00H...7FH
(4) Panpot (reception only)
ccH
Parameter
Data Range (vvH)
0AH
Panpot
00H...7FH
(5) Expression
ccH
Parameter
Data Range (vvH)
0BH
Expression MSB
00H...7FH
(6) Damper Pedal/Sustain
ccH
Parameter
Data Range (vvH)
40H
Sustain MSB
00H...7FH
(7) Sostenuto
ccH
Parameter
Data Range (vvH)
42H
Sostenuto
00H...3FH:off, 40H...7FH:on
(8) Soft Pedal
ccH
Parameter
Data Range (vvH)
43H
Soft Pedal
00H...3FH:off, 40H...7FH:on
(9) Harmonic Content (reception only)
ccH
Parameter
Data Range (vvH)
47H
Harmonic Content
00H...7FH
(10) Release Time (reception only)
ccH
Parameter
Data Range (vvH)
48H
Release Time
00H...7FH
(11) Attack Time (reception only)
ccH
Parameter
Data Range (vvH)
49H
Attack Time
00H...7FH
(12) Brightness (reception only)
ccH
Parameter
Data Range (vvH)
4AH
Brightness
00H...7FH
(13) Portamento Control (reception only)
ccH
Parameter
Data Range (vvH)
54H
Portamento
00H...7FH
(14) Effect1 Depth (Reverb Send Level)
ccH
Parameter
Data Range (vvH)
5BH
Effect1 Depth
00H...7FH
Adjusts the reverb send level.
(15) Effect3 Depth (Chorus Send Level)
ccH
Parameter
Data Range (vvH)
5DH
Effect3 Depth
00H...7FH
(16) RPN
65H
RPN
MSB
64H
RPN
LSB
06H
Data Entry
MSB
26H
Data Entry
LSB
60H
Data
Increment
61H
Data
Decrement
* Parameters that are controllable with RPN:
• Coarse Tune
• Fine Tune
• Pitch Bend Range
3.
MODE MESSAGES
Data format: [BnH] -> [cc] -> [vv]
BnH =
Control event (n = channel number)
cc =
Control number
vv =
Data Range
(1) All Sound Off (reception only)
ccH
Parameter
Data Range (vvH)
78H
All Sound Off
00H
(2) Reset All Controllers (reception only)
ccH
Parameter
Data Range (vvH)
79H
Reset All Controllers
00H
Resets controllers as follows.
Controller
Value
Expression
127 (max)
Sustain
0 (off)
Sostenuto
0 (off)
Soft Pedal
0 (off)
(3) Local Control (reception only)
ccH
Parameter
Data Range (vvH)
7AH
Local Control
00H (off), 7FH (on)
(4) All Notes Off (reception only)
ccH
Parameter
Data Range (vvH)
7BH
All Notes Off
00H
Switches OFF all the notes that are currently ON on the specified
channel. Any notes being held by the sustain or sostenuto pedal
will continue to sound until the pedal is released.
(5) Omni Off (reception only)
ccH
Parameter
Data Range (vvH)
7CH
Omni Off
00H
Same processing as for All Notes Off.
(6) Omni On (reception only)
ccH
Parameter
Data Range (vvH)
7DH
Omni On
00H
Same processing as for All Notes Off.
(7) Mono (reception only)
ccH
Parameter
Data Range (vvH)
7EH
Mono
00H
Same processing as for All Sound Off.
(8) Poly (reception only)
ccH
Parameter
Data Range (vvH)
7FH
Poly
00H
Same processing as for All Sound Off.
When Control Change is turned OFF, Control Change messages
will not be transmitted or received.
Local on/off, OMNI on/off are not transmitted. (The appropriate note
off number is supplied with “All Note Off” transmission).
When a voice bank MSB/LSB is received, the number is stored in
the internal buffer regardless of the received order, then the stored
value is used to select the appropriate voice when a program
change message is received.
Poly mode is always active. This mode will not change when the
instrument receives a MONO/POLY mode message.