Yamaha P-45 Owner's Manual - Page 10
Setting Up - keyboard
View all Yamaha P-45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Setting Up Power Requirements Connect the AC adaptor plugs in the following order. DC IN jack (page 9) q AC Adaptor w AC Outlet * The shape of the plug and outlet differs depending on locale. WARNING • Use the specified adaptor (page 20) only. Using the wrong adaptor can result in damage to the instrument or overheating. CAUTION • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. NOTE • To disconnect the power adaptor, press the [ ] (Standby/On) switch and carry out the above procedure in reverse order. For the Power Adaptor with a Removable Plug Do not remove the plug from the power adaptor. If the plug is removed accidentally, slide the plug into place without touching the metallic parts, and then push the plug in completely until it clicks. Plug Slide the plug as indicated * The shape of the plug differs depending on locale. WARNING • Make sure to keep the plug attached to the AC adaptor. Using the plug alone can cause electric shock or fire. • Never touch the metallic section when attaching the plug. To avoid electric shock, short circuit or damage, also be careful that there is no dust between the AC adaptor and plug. Turning the Power On/Off q Set the volume to the minimum. w Press the [ ] (Standby/On) button to turn on the power. q w When the power is supplied to the instrument, the power lamp located on the left of the power switch is turned on. While playing the keyboard, adjust the volume level by using the [MASTER VOLUME] slider. To turn off the power, press the [ ] (Standby/On) switch again for a second. CAUTION • Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. Auto Power Off Function To prevent unnecessary power consumption, this function automatically turns the power off if no buttons or keys are operated for approximately 30 minutes. If desired, you can disable or enable this function. To disable the Auto Power Off function: When the instrument is turned off: While holding down the lowest key (A-1), press the [ ] (Standby/On) switch to turn on the power so that the power indicator flashes three times, after which the Auto Power Off function is disabled. A-1 When the instrument is turned on: While holding down [GRAND PIANO/FUNCTION], press the lowest key (A-1). A-1 10 P-45 Owner's Manual