Yamaha P-60 Owner's Manual - Page 10

ENGLISH Before Using the P-60 Power supply connections 1. Make sure that the [STANDBY/ON] switch of the P-60 is set to STANDBY. 2. Connect the AC adaptor's DC cable to the [DC IN 12V] jack. 3. Plug the AC adaptor into an AC outlet. After turning the power OFF, simply reverse the procedure to disconnect the power. DC IN 12V WARNING Use ONLY a Yamaha PA-5D AC Power Adaptor (or other adaptor specifically recommended by Yamaha) to power your instrument from the AC mains. The use of other adaptors may result in irreparable damage to both the adaptor and the P-60. WARNING Unplug the AC Power Adaptor when not using the P-60, or during electrical storms. Turning the power on After making sure that the P-60's AC power adaptor is properly plugged into the P-60 itself and plugged into a convenient AC wall outlet, press the [STANDBY/ON] switch located on the rear panel of the P-60. • The power indicator located on the left of the panel lights up. When you're ready to turn off the power, press the [STANDBY/ON] switch again. • The power indicator turns off. CAUTION Even when the switch is in the "STANDBY" position, electricity is still flowing to the instrument at the minimum level. When you are not using the P-60 for a long time, make sure you unplug the AC power adaptor from the wall AC outlet. Adjusting the volume To adjust the volume, use the [MASTER VOLUME] located at the top left of the panel. Play the keyboard to actually produce sound while you adjust the volume. The level decreases. The level increases. MIN MAX MASTER VOLUME CAUTION Do not use the P-60 at a high volume level for a long period of time, or your hearing may be damaged. TERMINOLOGY MASTER VOLUME: The volume level of the entire keyboard sound TIP You can also adjust the [PHONES/OUTPUT] output level using the [MASTER VOLUME] control. 10 P-60 Before Using the P-60