Yamaha P5000S Owner's Manual - Page 12
Specifications, General Specifications - power amp
UPC - 086792658933
View all Yamaha P5000S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Specifications ■ General Specifications Power Output Level (Rated Power) 1 kHz THD + N = 1% 8 Ω/STEREO 4 Ω/STEREO 8 Ω/BRIDGE P7000S 750 W × 2 1100 W × 2 2200 W × 1 P5000S 525 W × 2 750 W × 2 1500 W × 1 P3500S 390 W × 2 590 W × 2 1180 W × 1 P2500S 275 W × 2 390 W × 2 780 W × 1 20 Hz - 20 kHz THD + N = 0.1% 8 Ω/STEREO 4 Ω/STEREO 8 Ω/BRIDGE 700 W × 2 650 W × 2 (European Model) 950 W × 2 1900 W × 1 500 W × 2 700 W × 2 1400 W × 1 350 W × 2 450 W × 2 900 W × 1 250 W × 2 310 W × 2 620 W × 1 1 kHz 2 Ω/STEREO 1600 W × 2 1300 W × 2 1000 W × 2 650 W × 2 20 ms non-clip 4 Ω/BRIDGE 3200 W × 1 2600 W × 1 2000 W × 1 1300 W × 1 Power Bandwidth Half Power 10 Hz - 40 kHz (THD + N = 0.5 %) Total Harmonic Distortion (THD + N) 20 Hz - 20 kHz, Half Power 4 Ω - 8 Ω/STEREO 8 Ω/BRIDGE ≤ 0.1 % Frequency Response RL = 8 Ω, Po = 1 W 0 dB, +0.5 dB, -1 dB f = 20 Hz - 50 kHz Intermodulation distortion (IMD) 60 Hz:7 kHz, 4:1, Half Power 4 Ω - 8 Ω/STEREO 8 Ω/BRIDGE ≤ 0.1 % Channel Separation Vol. max Half Power RL = 8 Ω 1 kHz input 600 Ω shunt ≥ 70 dB Residual Noise Vol. min. 20 Hz - 20 kHz (DIN AUDIO) ≤ -70 dBu SN Ratio 20 Hz - 20 kHz (DIN AUDIO) 104 dB 103 dB 102 dB 100 dB Damping Factor RL = 8 Ω, 1 kHz ≥ 350 ≥ 200 Sensitivity (Vol. max.) Rated Power 8 Ω +8 dBu +6 dBu +4 dBu +3 dBu Voltage Gain (Vol. max.) 32.1 dB Input Impedance 30 kΩ/balanced, 15 kΩ/unbalanced Controls Front Panel POWER switch (Push on/Push off) Two 31-step Volume control knobs (one per ch) Rear Panel MODE switch (STEREO/PARALLEL/BRIDGE) Two FILTER switches (SUBWOOFER/LOW CUT/OFF) Two fc knobs (25 to 150 Hz, 12 dB/octave) YS Processing switch (ON/OFF) Connectors INPUT XLR-3-31 jacks (one per ch) 1/4-inch TRS phone jacks (one per ch) OUTPUT Speakon jacks (one per ch) 5-way binding posts 1/4-inch phone jacks (one per ch) Indicators POWER × 1 (Green) PROTECTION × 1 (Red) TEMP × 1 (Red) (heatsink temp ≥ 85°C) CLIP × 2 (Red) SIGNAL × 2 (Green) YS Processing × 1 (Yellow) Load protection POWER switch ON/OFF muting DC-fault power supply DC detection shutdown Amp. protection Temp. detection (heat sink temp ≥ 90°C), VI limiter (RL ≤ 1 Ω) Limiter Comp: THD ≥ 0.5 % Cooling Dual variable-speed fan Single variable-speed fan Power Requirements United States & Canada 120 V, 60 Hz Europe 230 V, 50 Hz Australia 240 V, 50 Hz Power Consumption Idling 35 W 35 W 30 W 25 W Output power, 4 Ω 650 W 500 W 450 W 320 W Dimensions (W × H × D) 480 × 88 × 456 mm Weight 12 kg 12 kg 15 kg 14 kg Included Accessories Security cover (with a hex wrench), Owner's Manual 0 dBu=0.775 Vrms, Half Power=1/2 Power Output Level (Rated Power) Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. European models Purchaser/User Information specified in EN55103-1 and EN55103-2. Inrush Current: 25A (P7000S, P5000S)/66A (P3500S)/68A (P2500S) Conforms to Environments: E1, E2, E3 and E4 12