Yamaha PSR-420 Owner's Manual - Page 26

Using Auto Accompaniment You can also use the CURSOR buttons or the number buttons to select the tempo value in the display, and then use the [-/NO] and [+/YES] buttons to set the tempo value as required. In this case the [-/NO] and [+/YES] buttons can be pressed simultaneously to recall the default tempo. This can be done either before the accompaniment is started or while it is playing. CURSOR 116 TEMPO 7 8 9 0 -/NO +/YES • In this case, three-digit numbers (i.e. "100" through "280") are entered by first pressing and holding the [1] or [2] button until "1" or "2" appears in the hundreds position on the display, then press the remaining two digits in sequence. 6 Start the Accompaniment ...There are several ways to start the accompaniment: q Straight start: Press the [START/STOP] button. The rhythm will begin playing immediately without bass and chord accompaniment. The currently selected MAIN [A] or [B] section will play. SYNC- START/STOP START/STOP INTRO MAIN AUTO FILL A B ENDING ACCOMP LARGE/SMALL • It is possible to select the MAIN A or B section prior to a straight start - refer to "8. Select the MAIN A and B Sections as Required," below. q Start with an introduction followed by the MAIN A variation: Press the [INTRO] button so that its indicator lights, press the MAIN [A] button (not necessary if its indicator is already flashing), then press [START/STOP]. SYNC- START/STOP START/STOP INTRO MAIN AUTO FILL A B ENDING ACCOMP LARGE/SMALL q Start with an introduction followed by the MAIN B variation: Press the [INTRO] button so that its indicator lights, press the MAIN [B] button (not necessary if its indicator is already flashing), then press [START/STOP]. SYNC- START/STOP START/STOP INTRO MAIN AUTO FILL A B ENDING ACCOMP LARGE/SMALL 25