Yamaha QL5 Ql Editor Owner's Manual - Page 28
TO STEREO/MONO, A.GAIN-D.GAIN Link, Ø Phase, HPF Type
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
5 A.GAIN-D.GAIN Link This is an on/off switch for linking the analog gain and digital gain when gain compensation is on. 6 Ø (Phase) Inverts the phase polarity of the signal after AD conversion. 7 HPF Type Switches the attenuation (per octave) of the high pass filter between -12dB/oct and -6dB/oct. ❏ TO STEREO/MONO Here you can specify how the signal will be sent from the input channel to the STEREO bus/MONO bus. MODE • ST/MONO button When this button is on, the signal will be sent to the STEREO L/R bus and independently to the MONO bus. [INPUT CH 1-64] [ST IN channel 1-8] PAN (PAN/BALANCE for ST IN) The PAN knob adjusts the panning of the signal sent from the input channel to the STEREO bus L/R channels. You can set this to the center position by holding down the (< >) key of the computer keyboard and clicking the knob. You can select Pan or Balance for ST IN. The BALANCE knob adjusts the balance of the signal that is sent from the ST IN channel to the STEREO bus L/R channels. PAN/BALANCE can be switched with the [PAN]/[BALANCE] buttons. ST Switches the signal sent from the input channel to the STEREO bus on/off. M(C) Switches the signal sent from the input channel to the MONO bus on/off. • LCR button When this button is on, the signal will be sent to the L/C/R buses which work in conjunction with each other. [INPUT CH 1-64] [ST IN channel 1-8] PAN (PAN/BALANCE for ST IN) The PAN knob adjusts the panning of the signal that is sent from the input channel to each of the L/C/R channels. You can set this to the center position by holding down the (< >) key of the computer keyboard and clicking the knob. You can select Pan or Balance for ST IN. The BALANCE knob adjusts the balance of the signal that is sent from the ST IN channel to the STEREO bus L/R channels. PAN/BALANCE can be switched with the [PAN]/[BALANCE] buttons. CSR (Center Side Ratio) Adjusts the proportion of the CENTER channel level relative to the STEREO bus L/R in a range of 0-100%. 28 QL Editor Owner's Manual