Yamaha RX 797 Owners Manual - Page 52
XM Satellite Radio, Remote control, CHECK ANTENNA, UPDATING, NO SIGNAL, LOADING, OFF AIR, <XM>
UPC - 027108923833
View all Yamaha RX 797 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
TROUBLESHOOTING ■ XM Satellite Radio Error message CHECK ANTENNA UPDATING NO SIGNAL LOADING OFF AIR - - - Cause Remedy The XM Connect-and-Play digital antenna accessory is not connected, or does not work properly. Check the XM Connect-and-Play digital antenna accessory connections. The XM user encryption code is being updated. Wait until the encryption code is updated. The signal is too weak. Check the XM Connect-and-Play digital antenna accessory connections and orient it for the best reception. It takes longer than four seconds for audio or text data to be decoded. Wait until the decoding process has finished. The XM Satellite Radio channel you selected is Check the channel number again or select another XM not currently broadcasting any signal. Satellite Radio channel. The channel station ID (SID) is no longer available. No artist name/feature or song/program title is available. No channels are available for the selected category. Select another channel category by pressing CATEGORY on the front panel (or A-E/CAT. j / i on the remote control) repeatedly. ■ Remote control Problem The remote control does not work nor function properly. Cause Remedy Wrong distance or angle. The remote control will function within a maximum range of 6 m (19.7 ft) and no more than 30 degrees off-axis from the front panel. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. Reposition this unit. The batteries are weak. Replace all batteries. The remote control ID and this unit's ID do not match. Switch the remote control ID or this unit's ID. The remote control code was not correctly Try setting another code of the same manufacturer set. using "LIST OF REMOTE CONTROL CODES" at the end of this manual. Even if the remote control code is correctly set, there are some models that do not respond to the remote control. Use the supplied remote control for the components. See page 11 - 11 9,39,40 45 - 48