Yamaha RX V361 MCXSP10 Manual - Page 26
Check:testtone, Check Ok?, >cancel - setup
UPC - 027108927435
View all Yamaha RX V361 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Basic setup 7 Press Gn to select "SET" and then Gl / h to select the desired setting. SET >CANCEL Choices: SET, CANCEL • Select "SET" to apply the settings you made. • Select "CANCEL" to cancel the setup procedure without making any changes. y You can also press PMENU to cancel the setup procedure. 8 Press GENTER to confirm your selection. If you selected "SET" in step 7, each speaker outputs a test tone twice in turn. "CHECK:TestTone" appears in the front panel display for a few seconds and then "CHECK OK?" appears in the front panel display. CHECK:TestTone y • Check the speaker connections (see page 5) and adjust the "SPEAKERS" settings back in step 6, if necessary. • The indicator of the speaker currently outputting the test tone flashes in the front panel display. 9 Press Gl / h to select the desired setting. CHECK OK? ..YES Choices: YES, NO • Select "YES" to complete the setup procedure if the test tone levels from each speaker were satisfactory. • Select "NO" to proceed to the speaker level adjustment menu to balance the output level of each speaker. 10 Press GENTER to confirm your selection. • If you selected "YES" in step 9, the setup procedure is completed and the display returns to the top set menu display. • If you selected "NO" in step 9, the front speaker level adjustment display appears in the front panel display. 11 Press Gk / n to select a speaker and then Gl / h to adjust the balance. The selected speaker and the front left speaker (or the surround left speaker) output a test tone in turn. • Press h to increase the value. • Press l to decrease the value. FR ----||---- • Select "FR" to adjust the balance between the front left and right speakers. • Select "C" to adjust the balance between the front left and center speakers. • Select "SL" to adjust the balance between the front left and surround left speakers. • Select "SR" to adjust the balance between the surround left and surround right speakers. • Select "SWFR" to adjust the balance between the front left speaker and the subwoofer. Note The available speaker channels differ depending on the setting of the speakers. 12 Press PMENU to exit from "BASIC SETUP". 22 En