Yamaha RX V663 Owner's Manual - Page 111
Remote control AMP ID, to enter - av receiver
UPC - 027108930121
View all Yamaha RX V663 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
See page 106 for the operation of the advanced setup. ■ Remote control AMP ID REMOTE AMP Use this feature to set the AMP ID of this unit for remote control recognition. This feature is useful when you operate this unit and the other Yamaha receivers/ amplifiers in the same room separately. Choices: ID1, ID2 • Select "ID1" when the remote control AMP ID code is set to "5019". • Select "ID2" when the remote control AMP ID code is set to "5020". Setting remote control AMP ID codes You need to set the remote control AMP ID code for the remote control. 1 While pressing and holding 5AMP on the remote control, press 2AV POWER for more than 3 seconds. 5AMP flashes twice. AMP POWER AV Advanced setup ■ Remote control TUNER ID REMOTE TU Use this feature to set the TUNER ID of this unit for remote control recognition. Choices: ID1, ID2 • Select "ID1" when the remote control TUNER ID code is set to "5007". • Select "ID2" when the remote control TUNER ID code is set to "5016". Setting remote control TUNER ID codes You need to set the remote control TUNER ID library code for the remote control. 1 While pressing and holding 4TUNER on the remote control, press 2AV POWER for more than 3 seconds. 5AMP flashes twice. TUNER POWER AV While holding down Press for 3 seconds While holding down Press for 3 seconds AMP flashes AMP flashes 2 Press the numeric buttons (G) to enter the code number "5019" or "5020". When the setting succeeds, 5AMP flashes twice; however, when it does not, 5AMP flashes repeatedly. AMP ID code *1 Function 5019 To operate this unit using (initial setting) the default code. 5020 To operate this unit using an alternative code. Remote control AMP ID *2 ID1 (initial setting) ID2 *1 The remote control setting *2 The setting of this unit 2 Press the numeric buttons (G) to enter the code number "5007" or "5016". When the setting succeeds, 5AMP flashes twice; however, when it does not, 5AMP flashes repeatedly. TUNER ID code *1 Function 5007 To operate this unit using (initial setting) the default code. 5016 To operate this unit using an alternative code. Remote control TUNER ID *2 ID1 (initial setting) ID2 *1 The remote control setting *2 The setting of this unit ADVANCED OPERATION English 107 En