Yamaha RX V995 Owner's Manual - Page 81

English CUSTOM INSTALLATION GUIDE You can make up a dual-room audio/video system with this unit. In this system, you can make this unit send audio and video signals to the main room's equipment (speakers and TV monitor) and the second room's equipment (amplifier and TV monitor) respectively. For example, you can enjoy listening to a CD source in the main room while another person is enjoying watching an LD source in the second room. Ⅵ Connections The following optional products are required to use the dualroom function. 1 An infrared emitter in the main room This emitter emits the infrared signals transmitted by the remote controller in the second room to the other components in the main room (for example, CD player or LD player). 2 An amplifier, TV monitor and speakers for the second room 3 A remote controller used in the second room 4 An infrared signal receiver for the second room Connect the ZONE 2 OUT audio output terminals of this unit to the MAIN IN terminals (or equivalents) of the amplifier in the second room, and connect the ZONE 2 OUT video output terminal of this unit to the video signal input terminal of the TV monitor in the second room. Example of system configuration and connections Main Room LD player etc. (*1) This unit 1 Infrared emitter VIDEO SIGNAL ZONE 2 OUT AUDIO SIGNAL ZONE 2 OUT Second Room 2 Amplifier TV monitor 3 Remote controller 4 Infrared signal receiver REMOTE CONTROL OUT REMOTE CONTROL IN (*1): Some Yamaha models can be connected to this unit's REMOTE CONTROL OUT terminals. If you connect these units in series, the use of an infrared emitter may not be necessary. This unit OUT IN OUT IN OUT Note Since there are so many ways to connect and use this unit in a dual-room system, we recommend that you consult with a custom installation specialist for connections which will best meet your requirements. Up to 6 units can be connected in this connecting way. 77