Yamaha S03 Owner's Manual - Page 64

Multi Mode 13-1. PEGIntL (PEG Initial Level) 13-2. PEGAtkTm (PEG Attack Time) 13-3. PEGRelL (PEG Release Level) 13-4. PEGRelTm (PEG Release Time) You can set PEG (Pitch Envelope Generator) Parameters for each Part. There are four parameters that control how the pitch changes from the moment a note is pressed on the keyboard to the moment it is released or the point at which the level has faded to zero. PEGInitL PAGE PART ELEM KEY 13 1 OCTAVE +00 PEGRelL PAGE PART ELEM KEY 13 1 OCTAVE +00 PEGAtkTm PAGE PART ELEM KEY 13 1 OCTAVE +00 PEGRelTm PAGE PART ELEM KEY 13 1 OCTAVE +00 Normal Pitch PEG Initial Level Time PEG Release Level PEG Attack Time Key on PEG Release Time Key off ❏ Settings: -64 ~ +63 I PEGIntL Determines the initial pitch, or the pitch that sounds the moment the key is played. I PEGAtkTm Determines the time it takes after you play the key for the pitch to return to normal (or original), from the pitch set in PEG Initial Level above. I PEGRelL Determines the final pitch that is reached after you release your finger from the key. I PEGRelTm Determines the time it takes for the pitch to reach the setting made in PEG Release Level above, from when you release your finger from the key. 14-1. Vib Rate (Vibrato Rate) 14-2. Vib Depth (Vibrato Depth) 14-3. Vib Delay (Vibrato Delay) Vib Rate PAGE PART ELEM KEY 14 1 OCTAVE +00 Vib Delay PAGE PART ELEM KEY 14 OCTAVE +00 Vib Depth PAGE PART ELEM KEY 14 1 OCTAVE +00 Depth Time Delay Key on Rate ❏ Settings: -64 ~ +63 I Vib Rate Determines the speed of pitch modulation. I Vib Depth Determines the depth or degree of pitch modulation. n This Parameter is not available for Drum Parts. I Vib Delay Determines the amount of time that elapses from when a key is played to when the Vibrato effect starts. The higher the value, the longer the delay before the onset of the Vibrato effect. n The Parameter is not available for Drum Parts. 64 Part Tone