Yamaha S750 Reference Manual - Page 107
MIDI Transmit Settings, UPPER, LOWER, NOTE Note events, CC Control Change, PC Program Change
View all Yamaha S750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
MIDI Transmit Settings The explanations here apply to the TRANSMIT page in step 4 on page 104. This determines which parts will be sent as MIDI data and over which MIDI channel the data will be sent. 1 The dots corresponding to each channel (1-16) flash briefly whenever any data is transmitted on the channel(s). 12 3 1 Use the [A]/[B] buttons or [1 ]/[2 ] buttons to select the part for changing transmit settings. The Parts listed on this display are the same as those shown in the MIXING CONSOLE display and CHANNEL ON/OFF display with the exception of the two parts below. UPPER A keyboard part played on the right side of the keyboard from the Split Point for the Voices (RIGHT 1 and/or 2). LOWER A keyboard part played on the left side of the keyboard from the Split Point for the Voices. This is not affected by the on/off status of the [ACMP] button. 2 Use the [3 ] buttons to select a channel via which the selected part will be transmitted. NOTE If the same transmit channel is assigned to several different parts, the transmitted MIDI messages are merged to a single channel-resulting in unexpected sounds and possible glitches in the connected MIDI device. NOTE Protected Songs cannot be transmitted even if the proper Song channels 1-16 are set to be transmitted. 3 Use the [4 ]-[8 ] button to determine the types of data to be sent. The following MIDI messages can be set on the TRANSMIT/RECEIVE display. NOTE (Note events page 66 CC (Control Change page 66 PC (Program Change page 66 PB (Pitch Bend page 66 AT (Aftertouch page 66 Connections 10 PSR-S950/S750 Reference Manual 107