Yamaha SVC210 Owner's Manual - Page 10
Winding the Strings
View all Yamaha SVC210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
G Winding the Strings 1 Before you string the instrument, set the adjuster so that it is in the middle of its adjustment range. (All adjusters) 2 Place the ball (on the end of the string) in the notch on the adjuster. Make sure the ball is properly inserted in the adjuster's notch. The adjuster should be set to the middle of its adjustment range. String Adjuster's notch Ball 3 At a point about 2 cm from the string's end, bend the string at a right angle and insert the end into the hole in the tuner. While pulling the string toward the bridge to maintain string tension, turn the tuner machine to wind the string around the tuning post. Make sure the string is wound toward the base of the post as shown in the illustration below. Insert the string's end into this hole About 2 cm Wind the string String 3rd string (G) [Looking from the front] 2nd string (D) 4th string (C) 1st string (A) 10