Yamaha SVV-200 Owner's Manual - Page 7

Setup I Installing the Bridge The Silent Viola is shipped from the factory with the bridge unfitted. First, set up the bridge and then proceed with tuning. • The lower side of the bridge supports the 1st string (A), C GD A the higher side supports the 4th string (C). Make sure 4th string Slit the bridge is placed properly, then set the bridge in the 1st string bridge seat. (Make sure the logo side of the bridge is facing the tailpiece.) • Make sure the entire underside of the bridge's legs is in [Looking from the tailpiece] contact with the pickup. Also, make sure that the bridge does not slide off of the Bridge Seat or that its legs are touching the sides of the Bridge Seat. Doing so will result in deteriorated sound Bridge Legs (Underside) quality. • Ensure that the tailpiece side of the bridge stands vertically. If it leans to one side, use both hands to adjust. Make sure that each string passes over the corresponding slits in the bridge. * Playing the viola with a leaning bridge may result in damage to the bridge or a deterioration in sound quality. Pickup Bridge seat [Placing the Bridge's Legs] Correct Bad Bad Right angle Body Bridge seat Tailpiece [Bridge is placed vertically] 7