Yamaha SW-3 Owner's Manual - Page 8

CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER • Leave the main speakers connected to the amplifier. • Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT. * For PRE OUT terminal connection, the amplifier must possess at least two sets of PRE OUT terminals. With some amplifiers with only one set of PRE OUT terminals, connection can result in no sound from the main left and right speakers. In this case, select the method of connecting to the speaker terminals. • To connect with a YAMAHA DSP amplifier, connect the LOW PASS (or SUBWOOFER etc.) terminal on the rear of the DSP amplifier to either the left (L) or right (R) INPUT 2 terminal. To connect one unit only Left speaker This unit STANDBY-RED ON-GREEN AUTO POWER ON OFF INPUT2 POWER OFF ON HIGH CUT VOLUME 50 Hz 150 Hz 0 10 INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS INPUT2 INPUT1 FROM AMPLIFIER Right speaker To AC outlet Amplifier OUTPUT TO SPEAKERS LOW PASS Pin plug cords To connect two units Left speaker INPUT2 INPUT1 FROM AMPLIFIER This unit STANDBY-RED ON-GREEN POWER OFF ON HIGH CUT 50 Hz 150 Hz AUTO POWER ON OFF INPUT2 VOLUME 0 10 INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS OUTPUT TO SPEAKERS This unit STANDBY-RED ON-GREEN POWER OFF ON HIGH CUT 50 Hz 150 Hz AUTO POWER ON OFF INPUT2 VOLUME 0 10 INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS PRE OUT INPUT2 INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS Right speaker Pin plug cords Amplifier PRE OUT To AC outlet To AC outlet Notes • When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on the rear panel of this unit. If connected, they will not produce sound. • When connecting to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal. 8