Yamaha Soavo-2 Owner's Manual - Page 5

English ATTACHING THE FRONT COVER The speaker and the front cover are packed separately. To attach the front cover, line up the four salients (magnet) on the reverse side of the front cover with the four corresponding pegs. SPECIFICATIONS Type 2-way bass reflex speaker system Non-Magnetic shielding type Driver 16 cm (6-5/16") cone woofer 3 cm (1-3/16") aluminum dome tweeter Impedance 6 Ω Frequency response 45 Hz to 50 kHz (- 10 dB) to 100 kHz (- 30 dB) Nominal input power 30 W Maximum input power 120 W Sensitivity 88 dB/2.83 V/m Crossover frequency 3 kHz Dimensions (W x H x D) Including terminals 220 x 380 x 353 mm (8-11/16" x 14-15/16" x 13-7/8") Speaker cabinet 220 x 380 x 329 mm (8-11/16" x 14-15/16" x 12-15/16") Weight 9.7 kg (21.4 lbs.) Notes • When the cover is not attached, take care not to touch the speaker units with your hands or to exert excessive force with tools. • There are magnets on the reverse side of the front cover. Do not place the front cover close to objects that might be affected by magnets, such as TVs, clocks, magnetic cards, diskettes etc. when you don't attach it. ABOUT THE PORT PLUG The port on the back of this unit has a port plug to adjust the bass level. When you want to increase the bass level, detach the port plug. Rear side • Specifications are subject to change without notice due to product improvements. • Care should be taken not to exceed the input power values noted above. • A speaker cable is not included with this model. Taking care of the speaker When you wipe this unit, do not use chemical solvents (ex. alcohol or thinners etc.); this might damage the finish. Use a clean, dry cloth. For heavy dirt, dampen a soft cloth in detergent diluted with the water, wring it out, and then clean this unit up with the cloth. Port plug Port Bass range characteristics: without port plug dB with port plug 50 200 300 Hz 5 En