Yamaha Soavo-900C Owner's Manual - Page 4

ATTACHING THE FRONT COVER The speaker and the front cover are packed separately. To attach the front cover, line up the four salients (magnet) on the reverse side of the front cover with the four corresponding pegs. Notes • When the cover is not attached, take care not to touch the speaker units with your hands or to exert excessive force with tools. • There are magnets on the reverse side of the front cover. Do not place the front cover close to objects that might be affected by magnets, such as TVs, clocks, magnetic cards, diskettes etc. when you don't use it. SPECIFICATIONS Type 2-way bass reflex speaker system Magnetic shielding type Driver 13 cm (5") cone woofer x 2 3 cm (1") Aluminum dome tweeter Impedance 6 Ω Frequency Response 56 Hz to 50 kHz (-10 dB) to 100 kHz (-30 dB) Nominal Input Power 40 W Maximum Input Power 200 W Sensitivity 89 dB/2.83 V/m Crossover Frequency 3 kHz Dimensions (W x H x D 500 x 170 x 271 mm (19-11/16" x 6-11/16" x 10-11/16") Weight 8.6 kg (18.15 lbs.) • Specifications subject to change without notice due to product improvements. • Care should be taken not to exceed the input power values noted above. Taking care of the speaker When you wipe this unit, do not use chemical solvents (ex. alcohol or thinners etc.); this might damage the finish. Use a clean, dry cloth. For heavy dirt, dampen a soft cloth in detergent diluted with the water, wring it out, and then clean this unit up with a soft cloth. 4En