Home » Yamaha Manuals » Musical Instruments » Yamaha TP-4000 » Manual Viewer

Yamaha TP-4000 Owner's Manual

Yamaha TP-4000 Manual

Get Yamaha TP-4000 PDF manuals and user guides

View all Yamaha TP-4000 manuals

Add to My Manuals
Save this manual to your list of manuals

Yamaha TP-4000 manual content summary:

Yamaha TP-4000 | Owner's Manual - Page 1
PEDAL TIMPANI TIMBALE À PÉDALE TIMBAL DE PEDAL TP-6220 /23 /26 /29 /32 TP-4223 /26 /29 /32 TP-5020(G/H) /23 (G/H) /26 (G/H) /29 (G/H) /32 (G/H) TP-7020(H) /23(H) /26(H) /29(H) /32(H) TP-7220 / 23 / 26 / 29 / 32 Owner's Manual Mode d'emploi Manual de Instrucciones Ⴈ޼൭Ҩ Français Español
Yamaha TP-4000 | Owner's Manual - Page 2
using select materials. Proper care will ensure that your Yamaha instrument will deliver its full and rich sound for years to come. When using the pedal timpani for the first time after unpacking, make sure to set it up according to the instructions of section "Before Using The Pedal Timpani" on
Yamaha TP-4000 | Owner's Manual - Page 3
Tension Adjustment Bolt Third Wheel (removable) G Lubrication Lubricate the moving parts of the tuning mechanism as shown in the diagram. This should be done at least once a year, or as needed. Points of lubrication * The illustrations on this page show a pedal timpani of the TP-6200 series. 3
Yamaha TP-4000 | Owner's Manual - Page 4
Before Using The Pedal Timpani Your Yamaha pedal timpani is equipped with a plastic head carefully mounted and tuned (adjusted to a note) at the factory, and thus can be used after setup immediately.
Yamaha TP-4000 | Owner's Manual - Page 5
obtained. For details on precise tuning refer to "Adjusting The Sound Of Your Timpani" on the following page. Note As the head will stretch over time, readjustment should be performed periodically (starting with step 7 ) 5
Yamaha TP-4000 | Owner's Manual - Page 6
pedal timpani for the first time after unpacking, make sure to set it up according to the instructions of section "Before Using The A. When tuned properly, your Yamaha timpani will give you its full tonal range without being overtensioned. I Standard Tonal Ranges for Yamaha Timpani 32" (81cm) 29"
Yamaha TP-4000 | Owner's Manual - Page 7
its tonal range. Depress the toe of the pedal to change to a higher pitch (note). 9 After tuning, perform spring tension adjustment bolt by more 3 rotations at a time, as the toe of the pedal tends to drop abruptly key G Pedal balance spring mechanism Your Yamaha pedal timpani is equipped with a
Yamaha TP-4000 | Owner's Manual - Page 8
referring to "Adjusting the Pointer Position". 2 Slide the lowest note of the indicator ("A" in case of a 26" timpani - see "Standard Tonal Ranges for Yamaha Timpani" on page 6) to the position where its center line coincides with the pointer. 3 Tune the instrument to the next higher pitch (note) by
Yamaha TP-4000 | Owner's Manual - Page 9
movement of the pedal when the head is struck strongly causing a small change in pitch. G PAC Adjustment Use the timpani key to turn the PAC / TP-70xx (H) series use a wing bolt on the PAC adjustment system. PAC adjustment bolt The PAC (Pedal Adjustment Clutch) is an original Yamaha mechanism
Yamaha TP-4000 | Owner's Manual - Page 10
and pull the wheel down. * The illustration shows a pedal timpani of the TP-62xx series. After setting up the timpani, lock the other two casters to push down the "ON" side of the caster lock. Using the Third Wheel (TP-70xx Series) The third wheel can be easily moved in or out of position with
Yamaha TP-4000 | Owner's Manual - Page 11
YAMAHA logo must be on the side opposite the pedal. The hoop must be re-mounted in the same position as marked with cellophane tape in step 2. Tighten the tuning bolts alternately by hand until the head is tensioned slightly. At this time than two years, the following problems may occur: • It may