Yamaha TSX 130 Owner's Manual - Page 21

iPod™, Disc playback, English, ADDITIONAL, INFORMATION

Page 21 highlights

ADDITIONAL INFORMATION iPod™ TROUBLESHOOTING Problem "iPod Connect Error" appears on the front panel display. The iPod does not charge up. "iPod Not Connected" appears on the front panel display after you set the iPod. The iPod makes no sound. The iPod sounds, but you cannot operate it with the unit or the remote control. You cannot operate from the iPod. The playback information is not displayed on the front panel display. "Unknown iPod" appears on the front panel display after you set the iPod. Cause There is a problem with communication between the unit and your iPod. The iPod is set in the iPod dock improperly. LIST DISP is set to F.PANEL. The iPod you set is not compatible with the playback information display. The iPod being used is not supported by the unit. Solution Turn off the system and reconnect your iPod to the unit. Remove the iPod from the unit, then set it in the iPod dock again. Set LIST DISP to iPod from the FUNCTION menu (☞ P. 11). Only iPod touch, iPod classic, iPod 5th generation or later, and iPod nano are compatible with the function. Only iPod touch, iPod (Click Wheel, including iPod classic), iPod nano and iPod mini are supported. Disc playback Problem Some button operations do not work. Playback does not start immediately after pressing 6 on the unit or on the remote control. "No Disc" appears in the display even though a disc is in the disc tray. Cause The disc loaded into the unit may not be compatible. The disc may be dirty. The disc loaded into the unit may not be compatible. If the unit was moved from a cold to warm place, condensation may have formed on the disc reading lens. The disc loaded into the unit may not be compatible. The disc may be dirty. Disc is loaded upside-down. Solution Remove the disc and then check whether the unit supports the disc or not (☞ P. 19). Wipe the disc clean. Use a disc supported by the unit (☞ P. 19). Wait for an hour or two until the unit adjusts to the room temperature, and try again. Use a disc supported by the unit (☞ P. 19). Remove the disc and then wipe the disc clean. Remove the disc and then load the disc with the labeled side facing up. English 17 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

TROUBLESHOOTING
English
17
En
ADDITIONAL
INFORMATION
iPod™
Problem
Cause
Solution
“iPod Connect Error”
appears on the front panel
display.
There is a problem with
communication between the unit and
your iPod.
Turn off the system and reconnect your
iPod to the unit.
The iPod does not charge
up.
The iPod is set in the iPod dock
improperly.
Remove the iPod from the unit, then set
it in the iPod dock again.
“iPod Not Connected”
appears on the front panel
display after you set the
iPod.
The iPod makes no sound.
The iPod sounds, but you
cannot operate it with the
unit or the remote control.
You cannot operate from the
iPod.
LIST DISP is set to F.PANEL.
Set LIST DISP to iPod from the
FUNCTION menu (
P. 11).
The playback information is
not displayed on the front
panel display.
The iPod you set is not compatible
with the playback information
display.
Only iPod touch, iPod classic, iPod 5
th
generation or later, and iPod nano are
compatible with the function.
“Unknown iPod” appears on
the front panel display after
you set the iPod.
The iPod being used is not supported
by the unit.
Only iPod touch, iPod (Click Wheel,
including iPod classic), iPod nano and
iPod mini are supported.
Disc playback
Problem
Cause
Solution
Some button operations do
not work.
The disc loaded into the unit may not
be compatible.
Remove the disc and then check whether
the unit supports the disc or not
(
P. 19).
Playback does not start
immediately after pressing
on the unit or
on the
remote control.
The disc may be dirty.
Wipe the disc clean.
The disc loaded into the unit may not
be compatible.
Use a disc supported by the unit
(
P. 19).
If the unit was moved from a cold to
warm place, condensation may have
formed on the disc reading lens.
Wait for an hour or two until the unit
adjusts to the room temperature, and try
again.
“No Disc” appears in the
display even though a disc
is in the disc tray.
The disc loaded into the unit may not
be compatible.
Use a disc supported by the unit
(
P. 19).
The disc may be dirty.
Remove the disc and then wipe the disc
clean.
Disc is loaded upside-down.
Remove the disc and then load the disc
with the labeled side facing up.
6