Yamaha TSX-130BL Owners Manual - Page 21
iPod™, Disc playback, English, ADDITIONAL, INFORMATION
View all Yamaha TSX-130BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ADDITIONAL INFORMATION iPod™ TROUBLESHOOTING Problem "iPod Connect Error" appears on the front panel display. The iPod does not charge up. "iPod Not Connected" appears on the front panel display after you set the iPod. The iPod makes no sound. The iPod sounds, but you cannot operate it with the unit or the remote control. You cannot operate from the iPod. The playback information is not displayed on the front panel display. "Unknown iPod" appears on the front panel display after you set the iPod. Cause There is a problem with communication between the unit and your iPod. The iPod is set in the iPod dock improperly. LIST DISP is set to F.PANEL. The iPod you set is not compatible with the playback information display. The iPod being used is not supported by the unit. Solution Turn off the system and reconnect your iPod to the unit. Remove the iPod from the unit, then set it in the iPod dock again. Set LIST DISP to iPod from the FUNCTION menu (☞ P. 11). Only iPod touch, iPod classic, iPod 5th generation or later, and iPod nano are compatible with the function. Only iPod touch, iPod (Click Wheel, including iPod classic), iPod nano and iPod mini are supported. Disc playback Problem Some button operations do not work. Playback does not start immediately after pressing 6 on the unit or on the remote control. "No Disc" appears in the display even though a disc is in the disc tray. Cause The disc loaded into the unit may not be compatible. The disc may be dirty. The disc loaded into the unit may not be compatible. If the unit was moved from a cold to warm place, condensation may have formed on the disc reading lens. The disc loaded into the unit may not be compatible. The disc may be dirty. Disc is loaded upside-down. Solution Remove the disc and then check whether the unit supports the disc or not (☞ P. 19). Wipe the disc clean. Use a disc supported by the unit (☞ P. 19). Wait for an hour or two until the unit adjusts to the room temperature, and try again. Use a disc supported by the unit (☞ P. 19). Remove the disc and then wipe the disc clean. Remove the disc and then load the disc with the labeled side facing up. English 17 En