Yamaha WXC-50 WXA-50/WXC-50 Owner s Manual Basic - Page 17
Error table of STATUS indicator (front panel), Advanced operation, Bluetooth - problems
View all Yamaha WXC-50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Bluetooth Problem Cannot make the unit pair with a Bluetooth device. Cause The Bluetooth device does not support A2DP. The unit and the Bluetooth device are too far apart. The unit enters Standby mode. Another Bluetooth device is already connected to the unit. Remedy Use a Bluetooth device that supports A2DP. Move the Bluetooth device closer to the unit. Turn on the unit and select Bluetooth as the input source, and then perform pairing with the device. Terminate the current Bluetooth connection and then establish a new connection. Error table of STATUS indicator (front panel) Color Red Orange White Condition Blink Status of the unit Flashing, and the power 2 - 8 times turns off immediately after the power has been turned on As a safety precaution, the unit turned itself off. Flashing, and the power 4 - 8 times does not turn on As a safety precaution, capability to turn on the power is disabled. Contact your nearest authorized Yamaha dealer or service center to request repair. Flashing (every 0.5 second) Repeat blinking 2 - 7 An error occurred during firmware updating. For more times and 1 second off information about updating the firmware, refer to the until the unit is turned off Owner's Manual (Advanced) that can be downloaded from the Yamaha website. Slow flashing (every 1 second) Twice 3 times An error is occurring with the USB device. An error is occurring with the network. 5 times An error is occurring with WAC/WPS/CONNECT. Repeated until the unit is Firmware update failed. Update the firmware again. turned off For more information about updating the firmware, refer to the Owner's Manual (Advanced) that can be downloaded from the Yamaha website. Flashing Twice The remote control IDs of the unit and the remote control are not identical, or reception of the remote control signal is disabled. For more information about setting the remote control, refer to the Owner's Manual (Advanced) that can be downloaded from the Yamaha website. Slow flashing after turning on the power 10 times A new firmware update is available. For more information about updating the firmware, refer to the Owner's Manual (Advanced) that can be downloaded from the Yamaha website. Advanced operation The unit is equipped with many other functions such as tone adjustment. For more information about operating the unit, refer to the Owner's Manual (Advanced), which can be downloaded from the Yamaha website: EN 1. Access the Yamaha website (http://download.yamaha.com/) with a web browser. 2. Select your country or region. 3. Type WXA-50 or WXC-50 (model name) in the blank of "Search by Model Name". 4. Click "Search" button. 5. Download the Owner's Manual displayed on "Search Results". En 16