Yamaha YAS-103 Owners Manual - Page 14

Settings 4-2 While pointing your TV's remote control at the remote control sensor, hold down the mute key for more than 1 second twice or three times. Programming the sound bar with the TV's remote control (TV's remote control learning function) Once you program the sound bar, you can control it with your TV's remote control for functions such as turning on/off the TV and sound bar simultaneously, or volume up/ down and muting/unmuting of the sound bar. NOTE • This function is available only when your TV's remote control uses IR (infrared) signal. • An RF (Radio Frequency) remote contol will not work. • If you want to use a cable or satellite set top box's remote control to operate the sound bar, use your original TV's IR (infrared) remote control to program the sound bar, then use the set top box's remote control to operate. • If by changing the volume of the sound bar the TV's volume also changes, set the TV's volume to minimum, or disable speaker output. 1 Turn off the TV. 2 Turn off the sound bar. 3 Hold down the LEARN key on the sound bar's remote control for more than 3 seconds to set the sound bar to the learning mode. When the sound bar is in the learning mode, the indicators on the front panel flash as shown below. NOTE • Steps 4 to 7 require only the TV's remote control and the keys on the front panel of the sound bar. The remote control of the sound bar is not necessary. • If the sound bar has already learned functions, the following indicator light up. Mute: BD/DVD Volume (-): COAXIAL Volume (+): ANALOG Power: BLUETOOTH 4 Teach the sound bar the "Mute" code of the TV's remote control. 4-1 Press INPUT on the front panel of the sound bar. 12 En Approx. 30 cm (1 ft) TV's remote control Hold down Release Hold down Release (more than 1 second) (more than 1 second) (more than 1 second) (more than 1 second) Result Bleep/buzzer Indicators Successfully learned Once Lights up Failed to learn * Repeat from Twice Step 4-1. Flash 5 Teach the sound bar the "Volume (-)" code of the TV's remote control. 5-1 Press VOLUME (-) on the front panel of the sound bar. 5-2 While pointing your TV's remote control at the remote control sensor, hold down the volume (-) key for more than 1 second twice or three times. Result Bleep/buzzer Indicators Successfully learned Once Lights up Failed to learn * Repeat from Twice Step 5-1. Flash