Yamaha YAS-106 Owners Manual - Page 31

Problem No surround effect. Noise is heard. Video is not displayed on TV screen. When the unit is turned off, video and/or audio from a playback device are not output to the TV. Cause Stereo playback is selected. The volume is too low. The TV or playback device is set to output 2 channel audio (such as PCM) only. Sound is also heard from the TV built-in speakers. The listening position is too close to the unit. The unit is too close to another digital or high-frequency device. The HDMI cable is not securely connected. The HDMI control function is disabled. Remedy Select surround playback (p. 20). Turn up the volume (p. 21). Change the digital audio output setting on the TV or playback device to BitStream. Set the TV volume to minimum (p. 22). The listening position should be at some distance from the unit. Move those devices away from the unit. Connect the HDMI cable properly (p. 16). Enable the HDMI control function (p. 26) Remote control Problem The unit cannot be operated using the remote control. The TV cannot be operated using the TV's remote control. Cause The unit is out of the operating range. The batteries are weak. The remote control sensor of the unit is exposed to direct sunlight or strong lighting. The unit is blocking the TV's remote control sensor. Remedy Use the remote control within the operating range (p. 8). Replace with new batteries (p. 9). Adjust the lighting angle, or reposition the unit. Position the unit so that it does not obstruct the TV's remote control sensor. En 31