Yamaha YRS-700 Owners Manual - Page 25

PREPARATION CONNECTION/ INITIAL SETTINGS Advanced setup 1 Press key to turn this unit to standby mode. 2 While holding down INPUT key on the front panel, press key on the remote control to turn on the power. "ADVANCED SETUP" appears in the front panel display. 3 Release INPUT key on the front panel. 4 Press U/ V to select the desired menu on the front panel display and then press ENTER key. 1) 5 Change setting by pressing Y/Z key. 2) 6 Press key to set this unit to the standby mode. The new setting will be reflected when you turn on the unit by pressing key. Menu TURN ON VOLUME MAX VOLUME SET PANEL INP. KEY F.PANEL. KEY R.INPUT POWER AC ON STANDBY FACTORY PRESET Description Sets volume level at power-on. Sets maximum volume. Enables/disables the INPUT key on the front panel. Enables/disables the keys on the front panel. Enables/disables power-on by remote control input keys when the unit is in standby mode. Sets whether or not this unit returns to its previous state when AC power is restored after a temporary power loss. Resets all settings to their default values, except settings in ADVANCED SETUP. Selectable item/ Adjustable range Off* (Not set), 01 to 99, MAX (Maximum) 01 to 99, MAX* (Maximum) P.INPUT: ON* (Enabled), P.INPUT: OFF (Disabled) P.INPUT: ON* (Enabled), P.INPUT: OFF (Disabled) R.INPUT PW: OFF* (Disables power-on), R.INPUT PW: ON (Enables power-on) AC STANDBY: OFF* (Restores the state before power was lost), AC STANDBY: ON (Enters standby mode) PRST: CANCEL* (Reset is not performed), PRST: RESET (Reset is performed) PLAYBACK SETTINGS TROUBLESHOOTING ABOUT THIS UNIT English 1) y To return to the previous menu, press RETURN key. 2) y The default settings are marked with "*". 23 En