Yamaha YSP 1000 Owner's Manual

Yamaha YSP 1000 - Digital Sound Projector Five CH Speaker Manual

Get Yamaha YSP 1000 - Digital Sound Projector Five CH Speaker PDF manuals and user guides
UPC - 027108924274
View all Yamaha YSP 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha YSP 1000 manual content summary:

  • Yamaha YSP 1000 | Owner's Manual - Page 1
    UB YSP-1000 Digital Sound Projector OWNER'S MANUAL
  • Yamaha YSP 1000 | Owner's Manual - Page 2
    INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE outlet. 10 Protect the power supply cable from being walked
  • Yamaha YSP 1000 | Owner's Manual - Page 3
    to the instructions found in the users manual, may cause ON", please try to eliminate the problem by using one of the following measures: Relocate is being affected by the interference. Utilize power outlets that are on different branch ( sounds is often undetectable until it is too late, YAMAHA
  • Yamaha YSP 1000 | Owner's Manual - Page 4
    qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons. 14 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet. 15 Be sure to read the "TROUBLESHOOTING" section
  • Yamaha YSP 1000 | Owner's Manual - Page 5
    range of the remote control 24 Using the remote control 25 Turning on the power 25 USING SET MENU 26 Displaying the OSD 26 The flow chart of SET MENU 27 AUTO SETUP 28 The flow chart of AUTO SETUP 28 Installing the optimizer microphone 29 Using AUTO SETUP 31 USING THE SYSTEM MEMORY 36
  • Yamaha YSP 1000 | Owner's Manual - Page 6
    hope that your listening room will give you the same kind of surround sound experience as your local movie theater. YAMAHA YSP-1000 Digital Sound Projector challenges this preconception that complicated speaker setup and troublesome wiring go hand-in-hand with the enjoyment of multi-channel surround
  • Yamaha YSP 1000 | Owner's Manual - Page 7
    and digital satellite tuner connected to this unit. In addition, the remote control is equipped with the macro capability so that you can perform a series of operations with the press of a single button. AUTO SETUP This unit employs the automatic sound beam optimization using the YAMAHA Parametric
  • Yamaha YSP 1000 | Owner's Manual - Page 8
    on the power of this unit. See "GETTING STARTED" on page 24. 4 Run AUTO SETUP. See "AUTO SETUP" on page 28. 5 Play back a source and enjoy surround sound. See "PLAYBACK" on page 39. If you want to make additional settings and adjustments 6 Run MANUAL SETUP and set remote control codes to fine
  • Yamaha YSP 1000 | Owner's Manual - Page 9
    . Remote control (×1) Batteries (×2) (AA, R6, UM-3) Optical cable (×1) STANDBY/ON POWER POWER AV TV DVD AUX VCR INPUT1 STB TV INPUT2 TV MACRO YSP 5BEAM (×1) Digital audio pin cable (×1) (Yellow) Optimizer microphone (×1) (Orange) Audio pin cable (×1) MUTE TV INPUT TV MUTE CODE SET
  • Yamaha YSP 1000 | Owner's Manual - Page 10
    the supplied optimizer microphone to be used to run AUTO SETUP (see page 28). 2 Front panel display Shows information about the operational status of this unit. 3 Remote control sensor Receives infrared signals from the remote control. 4 INPUT Press repeatedly to switch between input sources (TV
  • Yamaha YSP 1000 | Owner's Manual - Page 11
    INTRODUCTION Front panel display 12 3 CONTROLS AND FUNCTIONS 4 NIGHT SLEEP PCM DIGITAL PL VOL m ft mS dB 5 1 NIGHT indicator Lights up when you select a volume mode (see can adjust the brightness of the front panel display using the DISPLAY MENU parameters in MANUAL SETUP (see page 79). 7
  • Yamaha YSP 1000 | Owner's Manual - Page 12
    REMOTE IN DIGITAL IN AUDIO IN SUBWOOFER VIDEO IN VIDEO OUT 1 RS-232C/REMOTE IN terminals These are control expansion terminals for factory use only (see page 23). 2 DVD COAXIAL DIGITAL Use to connect a digital satellite tuner or a IN jacks Use to connect a digital satellite tuner or a cable
  • Yamaha YSP 1000 | Owner's Manual - Page 13
    this system. y You can also control other components using the remote control once you set the appropriate remote control codes. See "Controlling other components" on page 88 for details. 1 2 3 4 5 6 7 8 9 0 A B STANDBY/ON POWER POWER AV TV DVD AUX VCR INPUT1 STB TV INPUT2 TV MACRO YSP
  • Yamaha YSP 1000 | Owner's Manual - Page 14
    CONTROLS AND FUNCTIONS I MACRO Use to set the TV macro (see page 90). J INPUTMODE Switches between input modes (AUTO (see page 46). O MENU Displays the setup menu on your TV monitor (see pages CODE SET Mutes the audio output of the TV (see page 88). Use to set up remote control codes (see page 87). 10
  • Yamaha YSP 1000 | Owner's Manual - Page 15
    to 7 m) • Rooms with less than 2 m from the listening position to the speaker positions • Rooms where objects such as furniture are likely to obstruct the path of sound beams • Rooms where the listening position is close to the walls • Rooms where the listening position is not in front of this unit
  • Yamaha YSP 1000 | Owner's Manual - Page 16
    INSTALLATION ■ Installation examples Example 1 Install this unit as close to the exact center of the wall as possible. Example 2 Install this unit so that the sound beams can be reflected off the walls. Example 3 Install this unit as close to the exact front of your normal listening position. 12
  • Yamaha YSP 1000 | Owner's Manual - Page 17
    optional TV stand. TV This unit TV y Refer to the instructions supplied with the metal bracket for details on how to attach the metal bracket to the wall or how to attach this unit to the metal bracket. ■ Using a stand You can mount your TV on the stand placed on a commercially available rack
  • Yamaha YSP 1000 | Owner's Manual - Page 18
    sure you wipe the surface of the rack, etc. before securing the fasteners. Applying the tape to a dirty or wet surface will weaken the sticking power of the tape, and this unit may fall as a result. 14
  • Yamaha YSP 1000 | Owner's Manual - Page 19
    digital satellite tuner, cable TV tuner and game console. Further, by connecting a subwoofer to this unit, you can enjoy reinforced low bass sounds power until all connections between components are complete. Audio connection Video connection TV This unit DVD player Subwoofer VCR Digital
  • Yamaha YSP 1000 | Owner's Manual - Page 20
    unit and display the OSD for easy viewing when you adjust the system parameters in SET MENU. ■ Audio connections ■ Video connections Connect OPTICAL TV/STB VCR VCR DVD/AUX STB RS-232C REMOTE IN DIGITAL IN AUDIO IN SUBWOOFER VIDEO IN VIDEO OUT Cables used for audio connections (White
  • Yamaha YSP 1000 | Owner's Manual - Page 21
    Digital and DTS digital audio signals. If not, adjust the system settings of your DVD player/recorder. For details, refer to the operation manual supplied TV/STB VCR VCR DVD/AUX STB RS-232C REMOTE IN DIGITAL IN AUDIO IN SUBWOOFER VIDEO IN VIDEO OUT Cables used for audio connections
  • Yamaha YSP 1000 | Owner's Manual - Page 22
    panel of this unit COMPONENT COMPONENT DVD COAXIAL AUX TV/STB OPTICAL TV/STB VCR VCR DVD/AUX STB RS-232C REMOTE IN DIGITAL IN AUDIO IN SUBWOOFER VIDEO IN VIDEO OUT Cables used for audio connections (White) Audio pin cable (White) (Red) (Red) Cables used for video connections
  • Yamaha YSP 1000 | Owner's Manual - Page 23
    or a component video connection. COMPONENT DVD COAXIAL AUX TV/STB OPTICAL TV/STB VCR VCR DVD/AUX STB RS-232C REMOTE IN DIGITAL IN AUDIO IN SUBWOOFER VIDEO IN VIDEO OUT Cables used for audio connections (White) Audio pin cable (White) (Red) Optical cable (Red) Cables used
  • Yamaha YSP 1000 | Owner's Manual - Page 24
    analog broadcasting, turn off the power of your digital airwave tuner. Digital airwave tuner Optical digital output Video output Component video output RS-232C DVD COAXIAL AUX TV/STB OPTICAL REMOTE IN DIGITAL IN TV/STB VCR AUDIO IN VCR SUBWOOFER DVD/AUX STB VIDEO IN VIDEO OUT Cables
  • Yamaha YSP 1000 | Owner's Manual - Page 25
    (see page 77). CD player, etc. Optical digital output PREPARATION COMPONENT Rear panel of this unit COMPONENT COMPONENT DVD COAXIAL AUX TV/STB OPTICAL TV/STB VCR VCR DVD/AUX STB RS-232C REMOTE IN DIGITAL IN AUDIO IN SUBWOOFER VIDEO IN VIDEO OUT Cables used for connections
  • Yamaha YSP 1000 | Owner's Manual - Page 26
    , turn on the power of your subwoofer and then run AUTO SETUP (see page 28) or select SWFR for BASS OUT in SUBWOOFER SET (see page 75). Subwoofer Monaural input Rear panel of this unit COMPONENT COMPONENT COMPONENT RS-232C DVD COAXIAL AUX TV/STB OPTICAL REMOTE IN DIGITAL IN TV/STB VCR
  • Yamaha YSP 1000 | Owner's Manual - Page 27
    power supply cable into the AC IN terminal of this unit and then plug the other end into the AC wall outlet. To the AC outlet About the RS-232C/REMOTE IN/IR-OUT terminals The RS-232C, REMOTE IN and IR-OUT terminals do not support normal external component connections. These are control expansion
  • Yamaha YSP 1000 | Owner's Manual - Page 28
    is unwantedly erased, insert new batteries and reset the remote control codes again. Notes • Do not spill water or other liquids on the remote control. • Do not drop the remote control. • Do not leave or store the remote control in the following types of conditions: - places of high humidity
  • Yamaha YSP 1000 | Owner's Manual - Page 29
    this unit. The buttons on the remote control numbered 3 to 9 are operational only after you press YSP to switch to the operation mode of this unit. y You can control other components by setting the appropriate remote control codes (see page 87). Once the remote control code for each input source (TV
  • Yamaha YSP 1000 | Owner's Manual - Page 30
    OSD of this unit. 2 Press STANDBY/ON on the front panel or on the remote control to turn on the power of this unit. STANDBY/ON or Front panel Remote control 3 Turn on the power of your TV. 4 Press TV on the remote control to display the OSD of this unit on your TV screen. It may take
  • Yamaha YSP 1000 | Owner's Manual - Page 31
    AUTO SETUP" on page 35 for a complete list of error messages and possible remedies. Run BASIC SETUP. See "BASIC SETUP" on page 62. If the problem and adjustments Run MANUAL SETUP. See "MANUAL SETUP" on page 68. y • If you cannot clearly hear a sound beam from a specific speaker channel, adjust
  • Yamaha YSP 1000 | Owner's Manual - Page 32
    AUTO SETUP AUTO SETUP This unit creates a sound field by reflecting sound beams on the walls of your listening room and broadening the cohesion between speaker channels. Just as you would arrange the speaker position of other audio systems, you need to set the beam angle to enjoy the best possible
  • Yamaha YSP 1000 | Owner's Manual - Page 33
    this is not possible, you can manually fine-tune the sound beam angle and balance the sound beam output levels using MANUAL SETUP (see page 68) once the AUTO SETUP procedure is completed. • If a subwoofer with adjustable volume and crossover/high cut frequency controls is connected to this unit, set
  • Yamaha YSP 1000 | Owner's Manual - Page 34
    AUTO SETUP Example of using a tripod Optimizer microphone position More than 2 m Imaginary center line Within 1 m Within 1 m Tripod Example of using the supplied cardboard microphone stand ■ Assembling the
  • Yamaha YSP 1000 | Owner's Manual - Page 35
    your listening environment (see page 37). 1 Press STANDBY/ON on the front panel or on the remote control to turn on the power of this unit. STANDBY/ON or TEST ENTER RETURN Front panel Remote control 2 Press YSP on the remote control to switch to the operation mode of this unit. YSP SETUP 31
  • Yamaha YSP 1000 | Owner's Manual - Page 36
    / on the remote control to select AUTO SETUP and then press ENTER. The following screen appears on your TV. ENTER ENTER ;AUTO SETUP . BEAM+SOUND OPTIMZ BEAM OPTIMZ only SOUND OPTIMZ only [ ]/[ ]:Up/Down [ENTER]:Enter p PREPARATION . INSTALLING;;Parallel to Wall MOUNTING;;;;SHELF REFLECTING
  • Yamaha YSP 1000 | Owner's Manual - Page 37
    / / / to select and configure each parameter and then press ENTER. AUTO SETUP MOUNTING (Mounting) Use to select the mounted position of the unit in your listening room. Choices: SHELF (Shelf mount), WALL (Wall mount) ENTER SHELF INSTALLING (Installing) Use to select the installed position of the
  • Yamaha YSP 1000 | Owner's Manual - Page 38
    of the AUTO SETUP procedure are displayed on your TV. Example of the SHOW RESULT screen SHOW RESULT BEAM MODE: 5BEAM SUBWOOFER: NOT APPLICABLE WILL START in 10 SEC Move aside or behind YSP *****----- If you selected BEAM OPT+SOUND OPTIMZ or SOUND OPTIMZ only in step 5. PREPARATION . ENVIRONMENT
  • Yamaha YSP 1000 | Owner's Manual - Page 39
    29 the sound produced by this unit because is firmly connected to this unit and the sound output level is too low. placed in a proper location. If the problem persists, contact the nearest YAMAHA service center for assistance. An internal system error occurred. Repeat the AUTO SETUP procedure
  • Yamaha YSP 1000 | Owner's Manual - Page 40
    in SET MENU in the system memory of this unit. It YSP 4 Press / to select SAVE and then press ENTER. The following screen appears on your TV. p p p p 2 Press MENU on the remote control. The SET MENU screen appears on your TV. MENU SET MENU . ;MEMORY ;AUTO SETUP ;BASIC SETUP ;MANUAL SETUP
  • Yamaha YSP 1000 | Owner's Manual - Page 41
    Saving ! []:Select SET MENU . ;MEMORY ;AUTO SETUP ;BASIC SETUP ;MANUAL SETUP [ ]/[ ]:Up/Down [ENTER]:Enter p p 2 Press MENU on the remote control. The SET MENU screen appears on your TV. MENU SET MENU . ;MEMORY ;AUTO SETUP ;BASIC SETUP ;MANUAL SETUP [ ]/[ ]:Up/Down [ENTER]:Enter y • The
  • Yamaha YSP 1000 | Owner's Manual - Page 42
    USING THE SYSTEM MEMORY 3 Press / to select MEMORY and then press ENTER. The following []:Select p p 1)MEMORY LOAD USER1 USER2 USER3 [p]/[ ]:Select SET MENU . ;MEMORY ;AUTO SETUP ;BASIC SETUP ;MANUAL SETUP [ ]/[ ]:Up/Down [ENTER]:Enter 7 Press MENU to exit. The SET MENU screen disappears
  • Yamaha YSP 1000 | Owner's Manual - Page 43
    appear in the front panel display. Press STB on the remote control to play back a satellite broadcast. STB VOL BASIC OPERATION Press DVD on the remote control to play back a DVD. DVD INPUT VOLUME + STANDBY/ON VOL STANDBY/ON POWER POWER AV TV DVD AUX VCR INPUT1 STB TV INPUT2 TV MACRO
  • Yamaha YSP 1000 | Owner's Manual - Page 44
    source. y For details on the TV and the DVD player you are using, refer to the owner's manual supplied with the TV and the DVD player. 1 Turn on the power of your DVD player using the remote control supplied with the DVD player. INPUT VOLUME + STANDBY/ON VOLUME CH TV VOL 2 Switch to the
  • Yamaha YSP 1000 | Owner's Manual - Page 45
    ON appears in the front panel display, and the volume level indicator flashes. MUTE Flashes VOL 2 Press MUTE on the remote control again (or press VOLUME +/-) to resume the sound output. AUDIO MUTE OFF appears temporarily in the front panel display (or the numeric value of the current volume level
  • Yamaha YSP 1000 | Owner's Manual - Page 46
    control (STEREO, 3BEAM, 5BEAM, ST+3BEAM or TARGET). Select stereo mode for 2-channel sources, 3 beam mode, 5 beam mode and stereo plus 3 beam mode for 5.1-channel playback. All the beam modes are available in the following cases: • If you selected Parallel to Wall for INSTALLING in AUTO SETUP (see
  • Yamaha YSP 1000 | Owner's Manual - Page 47
    speakers. This mode is ideal for enjoying surround sound effects to the fullest when watching DVDs recorded in a multi-channel format or playing back 2-channel sources in a multi-channel format. Press 5BEAM on the remote control to select the 5 beam mode. 5BEAM 1 1 Press YSP on the remote control
  • Yamaha YSP 1000 | Owner's Manual - Page 48
    sound over a wider area. Press 3BEAM on the remote control to select the 3 beam mode. Outputs sound beams from the front left and right speakers output from the front left and right speakers. • The front left and right sound beams are output towards the walls in your listening room. Notes • When
  • Yamaha YSP 1000 | Owner's Manual - Page 49
    . This mode is ideal if you do not want the sound beams to be reflected on the walls in your listening room or if you do not disturb others asleep while enjoying music or movies at night. BEAM MODE Press TARGET on the remote control to select the target mode and then press / to
  • Yamaha YSP 1000 | Owner's Manual - Page 50
    AUTO, DTS or ANALOG) by pressing INPUTMODE on the remote control repeatedly (see page 86). • Discs encoded in DTS-ES or Dolby Digital 5.1 EX will be played back in DTS or Dolby Digital selected input source is selected. • If the power of this unit is turned off and on again, the surround mode
  • Yamaha YSP 1000 | Owner's Manual - Page 51
    5.1 channel playback so that you can enjoy a variety of surround sound effects by switching the surround mode. y The surround modes are PRO LOGIC PLII Movie PLII Music 1 Press YSP on the remote control to switch to the operation mode of this unit. YSP PLII Game Neo:6 Cinema Neo:6 Music Example
  • Yamaha YSP 1000 | Owner's Manual - Page 52
    VOLUME +/- on the remote control to adjust the volume level. VOLUME DVD AUX VCR INPUT1 STB TV INPUT2 TV MACRO YSP 5BEAM 1 INPUTMODE remote control supplied with your TV. 2 Press TV on the remote control. This unit outputs audio signals from your TV. TV 3 If you hear sound from your TV speakers
  • Yamaha YSP 1000 | Owner's Manual - Page 53
    Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect. YSP 5BEAM 1 STEREO 4 INPUTMODE SLEEP ST+3BEAM 2 TARGET 5 3BEAM 3 Press YSP on the remote control to switch to the operation mode of this unit. PLII Game Neo:6 Cinema YSP 2 Press SURROUND on the remote control repeatedly
  • Yamaha YSP 1000 | Owner's Manual - Page 54
    sound a wraparound effect, distributed throughout the entire surround sound field to give you an expansive feeling. Choices: ON/OFF Default setting: OFF DIMENSION the center channel sound to the left and right. If set to 0, center channel sounds output only from the center speaker. Control range: 0
  • Yamaha YSP 1000 | Owner's Manual - Page 55
    theaters. y The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS and Dolby Surround sources. Note Choose a sound a live instrument are the multiple reflections from the walls of the room. In addition to making the sound live, these reflections enable the listener to tell where
  • Yamaha YSP 1000 | Owner's Manual - Page 56
    in New York and lets you feel as if you are seated right in front of the stage. This program clearly reproduces dialogs and special sound effects of the latest science fiction films and lets you feel a broad and expansive cinematic space amid silence. This program reproduces the wide and grand
  • Yamaha YSP 1000 | Owner's Manual - Page 57
    feel as if you are seated in an actual rock or jazz concert hall. 1 Press YSP on the remote control to switch to the operation mode of this unit. YSP 2 Press MUSIC on the remote control to select the music sound field program. MUSIC 7 3 Check that MUSIC is displayed in the front panel display and
  • Yamaha YSP 1000 | Owner's Manual - Page 58
    . 1 Press YSP on the remote control to switch to the operation mode of this unit. 1 Press YSP on the remote control to switch to the operation mode of this unit. YSP YSP 2 Press MOVIE on the remote control to select the movie sound field program. MOVIE 8 2 Press SPORTS on the remote control to
  • Yamaha YSP 1000 | Owner's Manual - Page 59
    FIELD PROGRAMS Turning off CINEMA DSP programs Turn off the CINEMA DSP programs if you want to enjoy the original sound without the sound field program effect. 1 Press YSP on the remote control to switch to the operation mode of this unit. Adjusting CINEMA DSP levels You can enjoy good quality
  • Yamaha YSP 1000 | Owner's Manual - Page 60
    TEST ENTER RETURN 1 Press YSP on the remote control to switch to the operation mode of this unit. YSP 2 Press VOL MODE on the remote control to switch to the when listening to music sources to preserve ease-of-listening for all sounds. • Select TV EQUAL VOL when watching TV programs. • Select NIGHT
  • Yamaha YSP 1000 | Owner's Manual - Page 61
    4 Press / on the remote control to adjust the effect level of compression while NIGHT:CINEMA, NIGHT:MUSIC or canceled if you press STANDBY/ON on the front panel or on the remote control or if you disconnect the power supply cable from the AC wall outlet. USING THE VOLUME MODE BASIC OPERATION 57
  • Yamaha YSP 1000 | Owner's Manual - Page 62
    richer bass in the presence of a subwoofer. Note The TruBass is not available when the target mode is selected as the beam mode (see page 45). STANDBY/ON POWER POWER AV TV DVD AUX YSP VCR INPUT1 STB TV INPUT2 TV MACRO INPUTMODE SLEEP 2 Press on the remote control repeatedly to turn on SRS
  • Yamaha YSP 1000 | Owner's Manual - Page 63
    3 Press on the remote control repeatedly to turn off SRS TruBass. TruBass OFF is shown in the front panel display. TruBass MID TruBass DEEP TruBass OFF VOL USING TRUBASS BASIC OPERATION 59
  • Yamaha YSP 1000 | Owner's Manual - Page 64
    unit is still playing back a source. Setting the sleep timer Each time you press SLEEP on the remote control, the front panel display changes as shown below. YSP 5BEAM 1 STEREO 4 INPUTMODE SLEEP ST+3BEAM 2 UNIVERSAL 5 3BEAM 3 6 MUSIC 7 MOVIE 8 VOL MODE 9 SPORTS 0 OFF +10 SURROUND CH
  • Yamaha YSP 1000 | Owner's Manual - Page 65
    is stored in the system memory and automatically restored when you make a new setting next time. y The sleep timer setting can also be deactivated if you press STANDBY/ON on the front panel or on the remote control to set this unit to the standby mode or unplug the power supply cable from the
  • Yamaha YSP 1000 | Owner's Manual - Page 66
    appears on your TV. 1 Press YSP on the remote control to switch to the operation mode of this unit. ENTER ENTER YSP 2 Press MENU on the remote control. The SET MENU screen appears on your TV. MENU p p SET MENU . ;MEMORY ;AUTO SETUP ;BASIC SETUP ;MANUAL SETUP [ ]/[ ]:Up/Down [ENTER]:Enter
  • Yamaha YSP 1000 | Owner's Manual - Page 67
    ) 4 Check that the following screen is displayed on your TV. If this screen is not displayed, repeat steps 1 to 3. ;BASIC SETUP . 1 ROOM TYPE ? 2 3 4 PUSH [ENTER] Key. BASIC SETUP y If the shape of your listening room is irregular, select the shape that most closely resembles your room. In Example
  • Yamaha YSP 1000 | Owner's Manual - Page 68
    , make settings for ROOM TYPE. ;BASIC SETUP LE.E* SQUARE EQ. 2 INSTALLED POSITION wall left) WIDE CENTER (Wide wall center) WIDE RIGHT (Wide wall right) CORNER RIGHT (Corner right) CORNER LEFT (Corner left) NARROW LEFT (Narrow wall left) NARROW CENTER (Narrow wall center) NARROW RIGHT (Narrow wall
  • Yamaha YSP 1000 | Owner's Manual - Page 69
    in your listening room and then press ENTER. The following screen appears in the front panel display. ENTER ENTERENTER ■ ROOM SIZE (Room size) BASIC SETUP 11 Check that the following screen is displayed on your TV. If this screen is not displayed, make settings for INSTALLED POSITION. ;BASIC
  • Yamaha YSP 1000 | Owner's Manual - Page 70
    3 ROOM SIZE ? ---+---6.2m. MID 4.6m [p]/[ ]:Select [ENTER]:Enter 3.4 m (11 ft) SMALL (Small) 4.2 m (14 ft) 4.6 m (15 ft) MID (Medium) 6.2 m (21 ft) 5.4 m (18 ft) ■ SETUP OK (Confirming settings) 14 Check that the following screen is displayed on your TV. If this screen is not displayed, make
  • Yamaha YSP 1000 | Owner's Manual - Page 71
    NO to cancel the settings and return to the initial SET MENU screen. SET MENU ;MEMORY ;AUTO SETUP . ;BASIC SETUP ;MANUAL SETUP [ ]/[ ]:Up/Down [ENTER]:Enter 17 Press MENU to complete the BASIC SETUP procedure. The SET MENU display disappears from your TV screen. MENU This completes the parameter
  • Yamaha YSP 1000 | Owner's Manual - Page 72
    MANUAL SETUP MANUAL SETUP To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment parameters, as well as to make advanced settings for speaker positions, sound beams, digital input and the OSD. Change the initial settings (indicated in bold under
  • Yamaha YSP 1000 | Owner's Manual - Page 73
    ENTER RETURN y You can adjust the SET MENU parameters while the unit is reproducing sound. 1 Press YSP on the remote control to switch to the operation mode of this unit. ENTER ENTER ;MANUAL SETUP . 1 SOUND MENU 2 BEAM MENU 3 INPUT MENU 4 DISPLAY MENU [ ]/[ ]:Up/Down [ENTER]:Enter 4 Press / to
  • Yamaha YSP 1000 | Owner's Manual - Page 74
    various parameters related to the sound beam output. SET MENU → MANUAL SETUP → BEAM MENU 2 BEAM MENU . A)SETTING PARAMETERS B)BEAM ADJUSTMENT C)IMAGE LOCATION [ ]/[ ]:Up/Down [SELECT]:Enter • Select FLAT TO WALL if this unit is installed in parallel with the wall in your listening room. Adjust
  • Yamaha YSP 1000 | Owner's Manual - Page 75
    wall. Listening position from the unit MANUAL SETUP INSTALLED HEIGHT (Installed height of this unit) Use to adjust the installed height of this unit. Control right signals to be output from the front left and right speakers. B)BEAM ADJUSTMENT . a)HORIZONTAL ANGLE b)VERTICAL ANGLE c)BEAM TRAVEL
  • Yamaha YSP 1000 | Owner's Manual - Page 76
    MANUAL SETUP HORIZONTAL ANGLE (Horizontal angle) Use to adjust the horizontal angle of beams for each speaker. By adjusting the horizontal angle of the beams, you can optimize the sound beam paths. A test tone is automatically output. BEAM TRAVEL LENGTH (Beam travel length) Use to set the distance
  • Yamaha YSP 1000 | Owner's Manual - Page 77
    . Front left speaker Center speaker () (+) MANUAL SETUP TREBLE GAIN (Treble gain) Use to adjust the high frequency output level of each speaker. y If the reflection point of the front left and right or surround left and right sound beams is a curtain or other acoustically absorbent surface
  • Yamaha YSP 1000 | Owner's Manual - Page 78
    from the center. Without adjustment With the front left speaker adjusted SOUND MENU Use to manually adjust various parameters related to the sound output. SET MENU → MANUAL SETUP → SOUND MENU 1 SOUND MENU . A)TONE CONTROL B)BEAM LEVEL C)SUBWOOFER SET D)MUTE LEVEL E)AUDIO DELAY F)ROOM EQ G)DD/DTS
  • Yamaha YSP 1000 | Owner's Manual - Page 79
    left and center speakers. • SL adjusts the balance of the front left and surround left speakers. • SR adjusts the balance of the surround left and surround right speakers. • SWFR adjusts the balance of the front left speaker and subwoofer. p p MANUAL SETUP ■ SUBWOOFER SET (Subwoofer set) Use to
  • Yamaha YSP 1000 | Owner's Manual - Page 80
    NORMAL p [ ]/[ ]:Up/Down[ ]/[ ]:Sel [ENTER]:Return MOUNT (Mount) Use to enhance medium to low range sounds. Choices: WALL (Wall mount), SHELF (Shelf mount) • Select WALL if this unit is mounted on the wall in your listening room. • Select SHELF if this unit is mounted on the shelf in your listening
  • Yamaha YSP 1000 | Owner's Manual - Page 81
    to the audio and video input. SET MENU → MANUAL SETUP → INPUT MENU 3 INPUT MENU . A)INPUT ASSIGNMENT B)INPUT MODE C)INPUT TRIM D)INPUT RENAME [ ]/[ ]:Up/Down [ENTER]:Enter ■ INPUT ASSIGNMENT (Input assignment) Use to assign the optical and coaxial digital input jacks of this unit to other components
  • Yamaha YSP 1000 | Owner's Manual - Page 82
    p p p p p p MANUAL SETUP ■ INPUT TRIM (Input trim) Use to adjust the input level of the input source. C)INPUT TRIM (. TV ANALOG;;;;;-3.0dB to the previous screen. ENTER D)INPUT RENAME AUX -> AUX p [ ]/[ ]:Position [ ]/[ ]:Character [ENTER]:Return 1 Press TEST on the remote control. TEST 78
  • Yamaha YSP 1000 | Owner's Manual - Page 83
    Use to adjust the brightness of the front panel display when you operate this unit by using the control buttons on the front panel or on the remote control. Choices: -2, -1, OFF AUTO DIMMER (Auto dimmer) If no operation is performed for a specified period, the front panel display dims. Use to adjust
  • Yamaha YSP 1000 | Owner's Manual - Page 84
    ADJUSTING SYSTEM PARAMETERS ADJUSTING SYSTEM PARAMETERS Setting the maximum volume level You can set the maximum volume level so that this unit will not output sound beyond the limited volume level. 1 Press STANDBY/ON on the front panel or on the remote control to turn off the power of this unit.
  • Yamaha YSP 1000 | Owner's Manual - Page 85
    system memory from being accidentally erased or unwantedly changed. 1 Repeat steps 1 to 3 in "Setting the maximum volume level" on page 80. 2 Press / on the remote control so that MEMORY PROTECT is shown in the front panel display. ENTER Front panel Remote control The new
  • Yamaha YSP 1000 | Owner's Manual - Page 86
    sound environment. VOL PROTECT: ON 1 Repeat steps 1 to 3 in "Setting the maximum volume level" on page 80. 2 Press / on the remote control remote control to set this unit to the standby mode. STANDBY/ON or Front panel Remote control The new setting will be activated when you turn on the power
  • Yamaha YSP 1000 | Owner's Manual - Page 87
    unit to the standby mode. STANDBY/ON or Front panel Remote control The new setting will be activated when you turn on the power of this unit next time. Adjusting the audio balance You can adjust the sound beam output level of each speaker by using the test tone or the audio output being played
  • Yamaha YSP 1000 | Owner's Manual - Page 88
    0 OFF +10 SURROUND CH LEVEL CINEMA DSP MENU TEST SUBWOOFER Note TEST SUBWOOFER is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 75). 3 Press / to adjust speaker volumes. TEST ENTER RETURN 1 Press CH LEVEL repeatedly (or
  • Yamaha YSP 1000 | Owner's Manual - Page 89
    2 Press / to adjust speaker volumes. ENTER Control range: -10 dB to +10 dB 3 Press CH LEVEL (or wait for a few seconds without operating this unit) when you have completed your adjustment. CH LEVEL ADJUSTING SYSTEM PARAMETERS ADVANCED OPERATION 85
  • Yamaha YSP 1000 | Owner's Manual - Page 90
    input source. y We recommend setting the input mode to AUTO in most cases. STANDBY/ON POWER POWER AV TV DVD AUX YSP VCR INPUT1 STB TV INPUT2 TV MACRO ( ) INPUTMODE SLEEP 1 Press one of the input selector buttons on the remote control to select the desired input source. DVD VCR STB TV
  • Yamaha YSP 1000 | Owner's Manual - Page 91
    component functions correctly, the remote control code setup was successful. If the external component does not function correctly, the remote control code may be incorrect. Confirm that the remote control code is correct (see "LIST OF REMOTE CONTROL CODES" at the end of this manual) and start over
  • Yamaha YSP 1000 | Owner's Manual - Page 92
    REMOTE CONTROL FEATURES Controlling other components ■ Operating your TV Press TV to select TV as the input source. TV 2 STANDBY/ON POWER POWER AV TV DVD AUX VCR INPUT1 STB TV INPUT2 TV MACRO YSP ( ) INPUTMODE SLEEP 5BEAM 1 ST+3BEAM 2 3BEAM 3 STEREO TARGET 4 5 6 MUSIC 7 MOVIE 8
  • Yamaha YSP 1000 | Owner's Manual - Page 93
    REMOTE CONTROL FEATURES y Press YSP on the remote control to return to the operation mode of this unit. YSP 2 STANDBY/ON POWER POWER AV TV DVD AUX VCR INPUT1 STB TV INPUT2 TV MACRO YSP CODE SET 1 AV POWER Turns on or off the power of your VCR. 2 Numeric buttons Use to enter numeric digits.
  • Yamaha YSP 1000 | Owner's Manual - Page 94
    SET DVD VCR STB TV AUX 2 Press MACRO on the remote control while holding down CODE SET. TV MUTE MACRO STANDBY/ON POWER POWER AV TV CODE SET DVD AUX VCR INPUT1 STB TV INPUT2 TV MACRO YSP 5BEAM 1 STEREO 4 MUSIC 7 INPUTMODE SLEEP ST+3BEAM 2 3BEAM 3 TARGET 5 6 MOVIE 8 VOL MODE
  • Yamaha YSP 1000 | Owner's Manual - Page 95
    mode changes. DVD VCR STB TV AUX 2 Press MACRO on the remote control while holding down CODE SET. TV MUTE MACRO CODE SET 3 Press INPUT1 on the remote control. INPUT1 ■ Canceling the macros 1 Press and hold CODE SET on the remote control and then press one of the input selector buttons to
  • Yamaha YSP 1000 | Owner's Manual - Page 96
    you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord and contact the nearest authorized YAMAHA dealer or service center. ■ General Problem Cause Remedy This unit fails to turn on when STANDBY/ON is
  • Yamaha YSP 1000 | Owner's Manual - Page 97
    TROUBLESHOOTING Problem Cause Remedy Distorted or too little bass sound CROSS OVER in SUBWOOFER SET is Set CROSS OVER correctly. set incorrectly. One of the night listening modes is currently selected. Turn off the night listening modes. Too much bass sound TruBass is currently turned on.
  • Yamaha YSP 1000 | Owner's Manual - Page 98
    component you want to operate. The remote control code was not correctly set. Set the remote control code correctly or try another code for the same manufacturer using the "LIST OF REMOTE CONTROL CODES" at the end of this manual. Even if the remote control code is correctly set, there are some
  • Yamaha YSP 1000 | Owner's Manual - Page 99
    (Digital Theater Systems) Digital Surround DTS digital surround was developed to replace the analog soundtracks of movies with a 6-channel digital sound track, and is now rapidly gaining popularity in movie theaters around the world. Digital Theater Systems Inc. has developed a home theater system
  • Yamaha YSP 1000 | Owner's Manual - Page 100
    29 P PCM 86 Power supply cable 23 R Remote control 9, 24 Remote control code 87 S Surround mode 46 Sleep timer 60 SET MENU 26 Sound field program 51 T Test tone 83 TruBass 58 TV macro 90 V Video pin cable 16 Volume mode 56 LFE 0.1 channel 75, 95 M MANUAL SETUP 68 MEMORY 36, 37
  • Yamaha YSP 1000 | Owner's Manual - Page 101
    120 Hz 1 (Subwoofer) VIDEO (1 Vp-p, 75 1 (Composite) COMPONENT VIDEO (Y: 1 Vp-p, 75 Ω PB/PR: 0.5 Vp-p, 75 1 • System Connector Jacks OPTIMIZER MIC 1 (Microphone input) RS-232C 1 (System control) REMOTE IN 1 (System control) IR-OUT 1 (System control) GENERAL • Power supply [U.S.A. and Canada
  • Yamaha YSP 1000 | Owner's Manual - Page 102
    LIST OF REMOTE CONTROL CODES TV ADMIRAL 292, 293, 216 AIWA 294, 276, 283, 284 AKAI , 215 VIDECH 297, 242 WARDS 297, 239, 232, 216 YAMAHA 299, 292, 242, 285, 287, 253 ZENITH 216, 261, 271 DVD PLAYER AIWA 648, 649 APEX DIGITAL 652, 653, 654 BYD:SIGN 678, 679 DAEWOO 655 DENON 623
  • Yamaha YSP 1000 | Owner's Manual - Page 103
    SONY TOCOM UNIVERSAL VIEWSTAR 756, 757 755 769, 772, 773, 774, 775 764, 766, 776, 777, 778, 779, 782 SATELLITE TUNER ECHOSTAR 822 GE 837, 838, 839 GENERAL INSTRUMENT 823 HITACHI 824 HUGHES 843, 844, 845, 846 JVC 822 MAGNAVOX 825 PANASONIC 826, 829 PHILLIPS 825, 843, 844, 845, 846,
  • Yamaha YSP 1000 | Owner's Manual - Page 104
    ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
  • Yamaha YSP 1000 | Owner's Manual - Page 105
    YSP-1000 QUICK REFERENCE GUIDE This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the surround sound effects in a quick, easy manner. Before installing this unit This unit creates surround sound by reflecting projected sound beams off the walls of
  • Yamaha YSP 1000 | Owner's Manual - Page 106
    your TV. 2 Press TV to select TV as the input source. STANDBY/ON POWER POWER AV TV DVD AUX YSP VCR STB TV INPUT1 INPUT2 MACRO INPUTMODE SLEEP 3 If you hear sound output from your TV speakers, turn down the volume level using the remote control supplied with your TV until you cannot hear any
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
YSP-1000
Digital Sound Projector
OWNER’S MANUAL
UB