Yamaha YSP-5100BL Quick Reference Guide - Page 1

Quick Reference Guide English for North America This Quick Reference Guide explains steps to connect external components to this unit and start playback. For detailed operation, refer to the "Owner's Manual" in the supplied CD-ROM. Check that you received all of the supplied accessories referring to "Supplied accessories" (page 6 of "Safety and Accessory Information" (separate booklet)). For instructions on how to operate or set the external components, refer to the owner's manual supplied with each component. 1 Installing this unit Decide where to install this unit. This unit uses sound beams to create surround effects (the arrows in the following diagrams indicate the images of paths of 5-channel sound beams). To achieve desired surround sound effects, install this unit where there are no objects such as furniture obstructing the path of sound beams. When installing this unit parallel to the wall Front left channel Center channel Front right channel Surround left channel Surround right channel : Object such as furniture When installing this unit in the corner of a room 40° to 50° Front left channel Center channel Front right channel Surround left channel Surround right channel : Object such as furniture Attach the stands. Attach the supplied stands to this unit as shown below. Make sure that you attach the left and right stands correctly. These stands are unnecessary if you use the optional wall mount bracket. When installing this unit using a rack When installing this unit, be careful not to scratch this unit, rack or floor. Depending on your installation environment, connections with external components (next step) should be done before installation. Right stand (supplied) Left stand (supplied) Screws (for stands, supplied) -  - INPUT VOLUME INTELLIBEAM MIC