Yamaha YVN50 Owner's Manual - Page 5
Changing Strings
View all Yamaha YVN50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Changing Strings ■ Before Attaching the Strings Before you string the instrument, set the fine tuner so that it is in the middle of its adjustment range. The fine tuner should be set to the middle of its adjustment range. ● For instruments equipped with fine tuners [Violin 4/4, 3/4, 1/2, Viola] At the tailpiece, hook the string's ball end onto the fine tuner's notch. [Violin 1/4, 1/8] At the tailpiece, hook the string's ball end into the slot on the string hole. String Fine Tuner's notch Ball End Fine Tuner From From above below String Ball End Looking from the under-side of the tailpiece. Tailpiece Ball End With the strings loosely extending up towards the neck, attach the fine tuners to the strings, as shown below. Tailpiece Fine Tuner String ● For instruments equipped with a fine tuner on the 1st string only [4th, 3rd and 2nd strings] At the tailpiece, hook the string's ball end into the slot on the string hole. [1st string] At the tailpiece, hook the string's ball end onto the fine tuner's notch. From From above below String Ball End Looking from the under-side of the tailpiece. Ball End String Fine Tuner's notch Ball End Tailpiece Ball End 5