Zanussi Z716WT83BI User Manual - Page 11
To a wall-pipe, BUILDING
View all Zanussi Z716WT83BI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
To a wall-pipe Directly to a built-in drain pipe in the room wall and L tighten it with the supplied cable tie L. You can extend the drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension. BUILDING IN min.600 mm min. 560 mm min. 820 mm 16-22 mm This appliance has been designed to be built into the kitchen furniture. The recess should have the dimensions shown in this picture. For recess with a height different than 820 mm, it is possible to buy the appropriate kit on the website. 596 mm 553 mm 50 mm 819 mm 50 mm 140 mm 76 mm If hoses run behind the appliance, make sure that nothing closes the small recess indicated with the measures 50 x 50 mm. The appliance is also equipped with an adhesive sponge pad H that you can find inside the drum. Attach it on the top of the appliance where indicated in the drawing. When levelling the appliance under the furniture, DO NOT squeeze the sponge pad. 11