Zenith L30W26 Operating Guide - Page 54
switching
View all Zenith L30W26 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Troubleshooting Checklist No output from one • Adjust Balance in the SOUND menu. (Refer to page 28.) of the speakers Picture appears slowly, after switching on • This is normal as the image is muted during the startup process of the monitor. Please contact your service center,if the picture has not appeared after five minutes. Horizontal/vertical bars or picture shaking • Check for local interference such as an electrical appliance or power tool. Unusual sound from inside the monitor • A change in ambient humidity or temperature may result in an unusual noise at the time of switching the monitor off or on and does not indicate a problem with the monitor. 54
54
No output from one
of the speakers
• Adjust
Balance
in the
SOUND
menu. (Refer to page 28.)
Picture appears
slowly, after
switching on
•
This is normal as the image is muted during the startup
process of the monitor.
Please contact your service center,if the picture has not
appeared after five minutes.
Horizontal/vertical
bars or picture
shaking
•
Check for local interference such as an electrical appliance or
power tool.
Unusual sound
from inside the
monitor
•
A change in ambient humidity or temperature may result in an
unusual noise at the time of switching the monitor off or on
and does not indicate a problem with the monitor.
Troubleshooting Checklist