Zenith SL-6037-WH User Guide - Page 6

Receiver Information All receivers have the following features and ratings: • Rated for 120VAC/60Hz supply voltage. • Light can be dimmed when used with remote control (OFF, 5 Selectable Dim Levels from Dimmest to Brightest, Full On). • Remembers last selected dim setting. • Not for use with Compact Fluorescent bulbs. • When first turned on wait 15 seconds. Indoor Plug-In Converter Features and Ratings: • Up to 300 Watt maximum incandescent load. • No wiring required. 1. Plug in indoor receiver. 2. Plug in light you wish to control. Caution: Do not exceed the maximum load limits listed above. 3. Check operation. Activate transmitter being used with receiver (see transmitter instructions). A signal will be sent to the receiver to turn the receiver ON or OFF. 4. Using Remote By-Pass Switch. These receivers are equipped with a remote by-pass switch. This switch allows the user to select between AUTO and MANUAL modes. AUTO mode allows the light to be operated by remote control or remote motion sensor. MANUAL mode allows the plugged in light to be operated manually. 5. Adjust audio alert volume. The alarm sounds only when the receiver is activated by the wireless motion sensor and entry switch. The alarm volume is adjusted by the thumbwheel on the side of the receiver unit. Remote By-Pass Switch Speaker Alarm Volume Control Control Locations  598-1271-01