ZyXEL ES-1124 User Guide - Page 19
Mounting the Switch on a Rack, Using a #2 Philips screwdriver
View all ZyXEL ES-1124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Chapter 2 Hardware Installation and Connection 3 Repeat steps 1 and 2 to install the second mounting bracket on the other side of the switch. 4 You may now mount the switch on a rack. Proceed to the next section. 2.2.3 Mounting the Switch on a Rack 1 Position a mounting bracket (that is already attached to the switch) on one side of the rack, lining up the two screw holes on the bracket with the screw holes on the side of the rack. Figure 5 Mounting the Switch on a Rack 2 Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting bracket holes into the rack. 3 Repeat steps 1 and 2 to attach the second mounting bracket on the other side of the rack. ES-1124 User's Guide 19
Chapter 2 Hardware Installation and Connection
ES-1124 User’s Guide
19
3
Repeat steps
1
and
2
to install the second mounting bracket on the other side of the
switch.
4
You may now mount the switch on a rack.
Proceed to the next section.
2.2.3
Mounting the Switch on a Rack
1
Position a mounting bracket (that is already attached to the switch) on one side of the
rack, lining up the two screw holes on the bracket with the screw holes on the side of the
rack.
Figure 5
Mounting the Switch on a Rack
2
Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting
bracket holes into the rack.
3
Repeat steps
1
and
2
to attach the second mounting bracket on the other side of the rack.