ZyXEL ES-2024A User Guide - Page 81

Chapter 8 Basic Setting Table 10 Basic Setting > IP Setup (continued) LABEL DESCRIPTION Default Gateway This field displays the IP address of default gateway. Delete Click Delete to remove the selected entry from the summary table. Cancel Click Cancel to clear the Delete check boxes. 8.7 Port Setup Use this screen to configure Switch port settings. Click Basic Setting > Port Setup in the navigation panel to display the configuration screen. Figure 36 Basic Setting > Port Setup The following table describes the labels in this screen. Table 11 Basic Setting > Port Setup LABEL DESCRIPTION Port This is the port index number. * Settings in this row apply to all ports. Use this row only if you want to make some settings the same for all ports. Use this row first to set the common settings and then make adjustments on a port-by-port basis. Active Note: Changes in this row are copied to all the ports as soon as you make them. Select this check box to enable a port. The factory default for all ports is enabled. A port must be enabled for data transmission to occur. ES-2024 Series User's Guide 81