ZyXEL G-220 v2 User Guide - Page 67
Table 14, The following table describes the labels in this screen.
View all ZyXEL G-220 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Figure 42 Station Mode: Adapter ZyXEL G-220 v2 User's Guide The following table describes the labels in this screen. Table 14 Station Mode: Adapter LABEL Adapter Setting Transfer Rate Preamble Type DESCRIPTION In most networking scenarios, the factory default Fully Auto setting is the most efficient and allows your G-220 v2 to operate at the highest possible transmission (data) rate. If you want to select a specific transmission rate, select one that the AP or peer wireless device supports. Note: With USB1.0/1.1, the G-220 v2 can only transmit at up to 11Mbps. Note: At the time of writing this field is not available on Windows Vista. Preamble is used to signal that data is coming to the receiver. Select the preamble type that the AP uses. Short preamble increases performance as less time sending preamble means more time for sending data. All IEEE 802.11b/g compliant wireless adapters support Long preamble, but not all support short preamble. Select Auto to have the G-220 v2 automatically use short preamble when all access point or wireless stations support it; otherwise the G-220 v2 uses long preamble. Note: The G-220 v2 and the access point or wireless stations MUST use the same preamble mode in order to communicate. Note: At the time of writing this field is not available on Windows Vista. Chapter 4 Wireless Station Mode Configuration 67