ZyXEL G-220 User Guide - Page 48
Start, OTIST, Reset, again or enter them manually in the wireless clients.
View all ZyXEL G-220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
ZyXEL G-220 v2 User's Guide 3 When the wireless client finds an OTIST-enabled AP, you must still click Start in the AP OTIST web configurator screen or hold in the Reset button (for one or two seconds) for the AP to transfer settings. 4 If you change the SSID or the keys on the AP after using OTIST, you need to run OTIST again or enter them manually in the wireless client(s). 5 If you configure OTIST to generate a WPA-PSK key, this key changes each time you run OTIST. Therefore, if a new wireless client joins your wireless network, you need to run OTIST on the AP and ALL the wireless clients again. 48 Chapter 3 Wireless LAN Network
ZyXEL G-220 v2 User’s Guide
48
Chapter 3 Wireless LAN Network
3
When the wireless client finds an OTIST-enabled AP, you must still click
Start
in the AP
OTIST
web configurator screen or hold in the
Reset
button (for one or two seconds) for
the AP to transfer settings.
4
If you change the SSID or the keys on the AP after using OTIST, you need to run OTIST
again or enter them manually in the wireless client(s).
5
If you configure OTIST to generate a WPA-PSK key, this key changes each time you run
OTIST. Therefore, if a new wireless client joins your wireless network, you need to run
OTIST on the AP and ALL the wireless clients again.