ZyXEL NWA-3500 User Guide - Page 276
System Status Screen
View all ZyXEL NWA-3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
Chapter 23 Maintenance Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a "*.bin" extension, for example "[Model #].bin". The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will reboot. See the Firmware and Configuration File Maintenance chapter for upgrading firmware using FTP/TFTP commands. 23.4 System Status Screen Use this screen to get a quick summary of the status of your NWA. Click Maintenance > System Status. The following screen displays. Figure 166 Maintenance > System Status The following table describes the labels in this screen. Table 82 Maintenance > System Status LABEL DESCRIPTION System Name This is the System Name you can configure in the SYSTEM > General screen. It is for identification purposes ZyNOS Firmware Version This is the ZyNOS Firmware version and date created. ZyNOS is ZyXEL's proprietary Network Operating System design. IP Address This is the Ethernet port IP address. IP Subnet Mask This is the Ethernet port subnet mask. DHCP This is the Ethernet port DHCP role - Client or None. Show Statistics Click Show Statistics to see the NWA performance statistics such as number of packets sent and number of packets received for each port. 23.4.1 Show Statistics Screen Use this screen to view diagnostic information about the NWA. Click Maintenance > Show Statistics. The following screen pops up. 276 NWA-3500/NWA-3550 User's Guide