ZyXEL NWD-270N User Guide - Page 50
WPA/WPA2, EAP Type
View all ZyXEL NWD-270N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 4 Station Mode Figure 34 Security Setting: WPA-PSK/WPA2-PSK The following table describes the labels in this screen. Table 10 Security Setting: WPA-PSK/WPA2-PSK LABEL DESCRIPTION Encryption Type The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses a simple common password, instead of user-specific credentials. Select the encryption type (TKIP or AES) for data encryption. Refer to Section 3.3.1.3 on page 34 for more information. Pre-Shared Key Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal characters. Back Click Back to go to the Site Survey screen to select and connect to another network. Next Click Next to confirm your selections and advance to the Summary screen. Refer to Section 4.4.2 on page 53. Exit Click Exit to return to the Site Survey screen without saving. 4.4.1.4 WPA/WPA2 The screen that displays when you select WPA or WPA2 differs, depending on the EAP Type you select (TLS, PEAP or TTLS). Figure 35 Security Settings: WPA/WPA2 50 NWD-270N User's Guide