ZyXEL NWD210N User Guide - Page 31
Table 9, LABEL, DESCRIPTION, The Advanced Screen
View all ZyXEL NWD210N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
ENGLISH The following table describes the labels in this screen. Table 9 The Advanced Screen LABEL DESCRIPTION Wireless Mode Select the type of network to which you want to connect. • Select 802.11 B/G mixed mode to connect to IEEE 802.11b or IEEE 802.11g devices. • Select 802.1.1 B mode to connect to IEEE 802.11b devices only. • Select 802.11 B/G/N mixed mode to connect to IEEE 802.11b, 802.11g or 802.11n wireless devices. Choose this if you are not sure which to use. TX Rate This field displays the maximum rate at which data is sent by the NWD210N over the wireless network. • When you select 802.11 B/G mixed mode or 802.11 B/G/N mixed mode in the Wireless Mode field, this field is set to Auto and is not user-configurable. • When you select 802.1.1 B mode in the Wireless Mode field, select Auto to have the NWD210N choose the highest speed the network supports, or select 1, 2, 5.5 or 11 Mbps. Enable TX Select this to turn burst transmission on. Burst Deselect it to turn burst transmission off. 30