ZyXEL P-2602HW-63 User Guide - Page 251
Table 95
View all ZyXEL P-2602HW-63 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
Figure 134 Static Route Edit P-2602H(W)(L)-DxA Series User's Guide The following table describes the labels in this screen. Table 95 Static Route Edit LABEL DESCRIPTION Active Route Name Destination IP Address IP Subnet Mask Gateway IP Address Back Apply Cancel This field allows you to activate/deactivate this static route. Enter the name of the IP static route. Leave this field blank to delete this static route. This parameter specifies the IP network address of the final destination. Routing is always based on network number. If you need to specify a route to a single host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the network number to be identical to the host ID. Enter the IP subnet mask here. Enter the IP address of the gateway. The gateway is a router or switch on the same network segment as the device's LAN or WAN port. The gateway helps forward packets to their destinations. Click Back to return to the previous screen without saving. Click Apply to save your changes back to the ZyXEL Device. Click Cancel to begin configuring this screen afresh. Chapter 18 Static Route 251