ZyXEL P-660RU-T1 User Guide - Page 260
The CWMP Setup Screen
View all ZyXEL P-660RU-T1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
Chapter 22 CWMP 22.2 The CWMP Setup Screen Use this screen to configure your ZyXEL Device to be managed by a management server. Click Advanced> CWMP to display the following screen. Figure 146 Advanced > CWMP The following table describes the fields in this screen. Table 92 Advanced > CWMP LINK DESCRIPTION CWMP Setup CWMP Select Activated to allow the ZyXEL Device to be managed by a management server or select Deactivated to not allow the ZyXEL Device to be managed by a management server. Login ACS Configure this part of the screen to log into the management server. URL Type the IP address or domain name of the management server. If the ZyXEL Device is behind a NAT router that assigns it a private IP address, you will have to configure a NAT port forwarding rule on the NAT router. User Name The user name is used to authenticate the ZyXEL Device when making a connection to the management server. This user name on the management server and the ZyXEL Device must be the same. Type a user name of up to 255 printable characters found on an Englishlanguage keyboard. Spaces and characters such as are allowed. Password The password is used to authenticate the ZyXEL Device when making a connection to the management server. This password on the management server and the ZyXEL Device must be the same. Type a password of up to 255 printable characters found on an Englishlanguage keyboard. 260 ADSL Router Series User's Guide