ZyXEL P-661HW-D1 User Guide - Page 279
Wall-mounting Instructions, Table 85
View all ZyXEL P-661HW-D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
Chapter 27 Product Specifications Table 85 Standards Supported (continued) STANDARD DESCRIPTION RFC 2684 Multiprotocol Encapsulation over ATM Adaptation Layer 5 RFC 2766 Network Address Translation - Protocol IEEE 802.11 Also known by the brand Wi-Fi, denotes a set of Wireless LAN/ WLAN standards developed by working group 11 of the IEEE LAN/MAN Standards Committee (IEEE 802) IEEE 802.11b Uses the 2.4 gigahertz (GHz) band IEEE 802.11g Uses the 2.4 gigahertz (GHz) band IEEE 802.11n Uses the 2.4 gigahertz (GHz) band IEEE 802.11d Standard for Local and Metropolitan Area Networks: Media Access Control (MAC) Bridges 802.1x Port Based Network Access Control IEEE 802.11e QoS IEEE 802.11 e Wireless LAN for Quality of Service ANSI T1.413, Issue 2 Asymmetric Digital Subscriber Line (ADSL) standard G dmt(G.992.1) G.992.1 Asymmetrical Digital Subscriber Line (ADSL) Transceivers ITU G.992.1 (G.DMT) ITU standard for ADSL using discrete multitone modulation ITU G.992.2 (G. Lite) ITU standard for ADSL using discrete multitone modulation ITU G.992.3 (G.dmt.bis) ITU standard (also referred to as ADSL2) that extends the capability of basic ADSL in data rates ITU G.992.4 (G.lite.bis) ITU standard (also referred to as ADSL2) that extends the capability of basic ADSL in data rates ITU G.992.5 (ADSL2+) ITU standard (also referred to as ADSL2+) that extends the capability of basic ADSL by doubling the number of downstream bits RFC 2383 ST2+ over ATM Protocol Specification - UNI 3.1 Version TR-069 TR-069 DSL Forum Standard for CPE Wan Management TR-064 DSL Forum LAN-Side DSL CPE Configuration 1.363.5 Compliant AAL5 SAR (Segmentation And Re-assembly) Wall-mounting Instructions Do the following to hang your ZyXEL Device on a wall. Note: See Table 82 on page 273 for the size of screws to use and how far apart to place them. 1 Locate a high position on a wall that is free of obstructions. Use a sturdy wall. 2 Drill two holes for the screws. Make sure the distance between the centers of the holes matches what is listed in the product specifications appendix. P-661HNU-Fx User's Guide 279